CNFE4+1SMSS2POE Comnet 5 Port 10/100 Mbps Ethernet Self-Managed Switch 1FX with PoE+ on 4TX 2 Fiber Single Mode 9/125μm

The ComNet CNFE4+1SMS(M,S)2POE is a five-port Ethernet switch with uplink management functionality and provides 4 copper ports operating at 10/100 Mbps and is designed to combine four electrical ports into a single optical port that forwards this data to the next network device. The fiber interface has an option of SC or ST connector type. There is no programming required to use this product. The CNFE4+1SMS(M,S)2POE comes pre-programmed, preventing network video flooding with dip switch selection of fiber port as uplink or as an unmanaged switch. Ports 1–4 can supply up to thirty watts of power (“Power over Ethernet”) and incorporate PoE+ features based on the IEEE 802.3at standard.It is “Plug-and-Play”.

Specifications

Data

• Data Interface - Ethernet
• Data Rate
  • 10/100 Mbps
  • IEEE 802.3 Compliant
  • Full Duplex or Half Duplex Electrical Ports/Full Duplex Optical Port
• Number Of Fibers - 2
• Wavelength - 1310nm, MM and SM
• Optical Emitter - Laser Diode

Connectors

• Optical - SC/ST
• Power - Terminal Block
• Data -RJ45

Led Indicators

• Optical Link/Data Activity
• Electrical Link/Data Activity
• Power
• Power over Ethernet (PoE+)

Power

• Operating Voltage Range - 48 VDC
• Power Consumption - 12W Max

Electrical & Mechanical

• Surface Mount - Wall or Flat Surface Screw Attachment
• Number of Rack Slots - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size - 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
• Shipping Weight - <2 lbs./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CNFE4+1SMSS2POE Specifications PDF

CNFE4+1SMSS2POE Installation Manual