FTL1-M1A-MSA KBC Networks 10/100Mbps Ethernet LAN fiber optic media converter "A" side 1 fiber 1310/1550nm multi-mode 17dB optical loss budget 4Km range Compact module ST connector US power plug

The KBC FTL series is a fully-ruggedized 10/100 Ethernet media converter. It supports transmission of an Ethernet channel over either one or two, multimode or singlemode optical fibers. Full duplex operation enables distances in excess of 50km on singlemode fiber. Plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit clearly. The series is available in compact, DIN rail or 3U chassis card configurations. Up to 28 FTL media converters can be accommodated in a KBC FR3 chassis.

Specifications

Standards

• IEEE Standard
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • & 100BASE-FX
  • IEEE 802.3x Full duplex

Data

• Data Formats - Ethernet
• Two Way Channels - 1
• Data Rate - 10 / 100 Mbps auto-sensing Half & full duplex

Optical

• Wavelength - 1310nm / 1550nm
• Fiber - Multimode or singlemode
• Number of Fibers - 1 or 2

Power

• Power Input - 12-24 Vac/dc @ 200mA
• Power Supply (1) - Input: 100 ~ 240 Vac Output: +12 Vdc
• Chassis Card - Supplied from FR3 PSU

Environmental

• Operating Temperature - -40°~ +74°C / -40°~ +165°F
• Storage Temperature - -40°~ +74°C / -40°~ +165°F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours

Mechanical

• Dimensions Compact(W x H x D) - 70mm x 58mm x 28mm (2.8” x 2.3” x 1.1”)
• DIN Rail - 110mm x 87mm x 25mm (4.3” x 3.4” x 0.98”)
• Number of 3U Chassis Card Slots(2) - 1

Connectors

• 10/100 Electrical - 1 x RJ45
• Fiber - ST, SC or FC
• Power(3) Compact & DIN Rail - 3-way screw block terminal
• Part Code - FTL1-M1*
• Fiber Type - Multimode
• No. - 1
• Optical Budget 50μm - 8dB
• 62.5μm - 12dB
• 9μm - 20dB
• Wavelength nm - 1310
• Approximate Transmission Distance(4) - 0~50km

FTL1-M1A-MSA Specifications PDF