FDVA4-S1T-WSA KBC Networks 4-ch point-to-point simplex video transmitter 1 fiber 1310nm single mode 15dB optical loss budget Desktop/wall-mount ST connector US power plug

The KBC FDVA4 series uses the most advanced digital technologies to provide excellent repeatable performance for today™s CCTV systems. It supports ransmission of four analog composite video channel over one multimode or singlemode optical fiber. PAL, NTSC and SECAM video standards are fully supported. The plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit clearly. The series is available in compact wall-mount or 3U chassis card.

Specifications

Video

• No. of Channels per Module - 4
• Format - PAL / NTSC / SECAM
• Input/Output - 1.0V pk-pk typical, 75Ω
• Bandwidth - 5 Hz ~ 6.5 MHz
• Digital Encoding (non Compressed) - 8 bit
• Differential Gain (10-90% APL) - <2%
• Differential Phase (10-90% APL) - <2™
• Signal to Noise Ratio (SNR) weighted - >60dB

Optical

• Wavelength - 1310nm
• Number of Fibers - 1
• Fiber - Multimode or Singlemode

Power

• Power Input (Wall-mount) - +12 -24 Vac/dc@ 400mA
• Power Supply(1) - Input: 100 ~ 240 Vac Output: +12 Vdc
• Chassis Card - UL and cUL listed PSU Supplied from FR3 PSU

Environmental

• Operating Temperature - -40™~+74™C / -40™~+165™F
• Storage Temperature - -40™~+74™C / -40™~+165™F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours

Mechanical

• Dimensions (Wall-mount L x W x H)(5) - 222mm x 134mm x 36mm (8.74™ x 5.28™ x 1.42™)
• Number of 3U Chassis Card Slots(2) - 1

Connectors

• Video - BNC 75Ω
• Fiber - ST, SC or FC (ST fitted as standard)
• Power(3) - Screw Block Terminal (Wall-mount)

FDVA4-S1T-WSA Specifications PDF