The cart is empty.
Dealers. First. Always.
DWG

POE1XT Pelco IEEE802.3at single port PoE 100 meter extender

SKU: POE1XT
  • Powered by an IEEE802.3at Source
  • Output is IEEE802.3af Compliant
  • Fully Compliant 25K Signature Resistance Detection IEEE802.3at and IEEE802.3af)
  • Boost Circuit to Compensate for Wire Drops
  • Diagnostic LEDs
  • Full Protection
  • Over Current Protection (OCP)
  • Short Circuit Protection (SCP)
More details...
UPC Number: 700880327418
MSRP Price: $390.00
Online Price: $390.00
Save to my Wish List
Product Details

The POE1XT is a single-port Power over Ethernet (PoE) Gigabit extender that is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The POE1XT provides a voltage boost to the PoE adding another 100 meters to extend Ethernet to 200 meters (656.17 feet).The POE1XT Gigabit extender accepts power from an IEEE802.3at source and is 25K signature resistance detection IEEE802.3at input compliant. DC input voltage range is 45 to 57 VDC. DC input current at maximum load is 1.0 A at 45 VDC and 0.8 A at 57 VDC. Total output power is 19 W with a 33.6 W PoE input and is 25K signature resistance detection IEEE802.3af output compliant.


Specifications


ELECTRICAL

  • Input (802.3at)
    • Input Source - Receives power from an IEEE802.3at source
    • Input Detection - 25K detection IEEE802.3at compliance
    • DC Input Voltage Range - 45 VDC to 57 VDC
    • DC Input Current - 1.0 A at 45 VDC and maximum load 0.8 A at 57 VDC and maximum load
  • Output (802.3af)
    • Total Output Power - 19 W with 33.6 W PoE input
    • DC Output Voltage - 54 V minimum, 56 V typical, 57 V maximum
    • Output Current - 10 mA minimum, 330 mA maximum
    • Ripple and Noise (Vp-p) - 250 mV maximum
    • Output Detection - 25K detection IEEE802.3af compliance
    • Efficiency - 75% minimum at maximum load
    • Short Circuit Protection - Outputs equipped with short circuit protection; the output can be shorted permanently without damage
    • Over Current Protection - 450 mA maximum for PoE Class 0-3 detection on output
  • Power Consumption
    • Power Consumed by POE1XT - 5 W maximum
  • Connection
    • Input/Output Connectors - RJ-45
  • Input Connection
    • GND - Pins 1,2 7,8
    • +VIN - Pins 3,6 4,5
  • Output Connection
    • GND - Pins 1,2
    • +VIN - Pins 3,6

ENVIRONMENTAL

  • Operating Temperature
    • Megabit Data Rates at 10 Mb and 100 Mb - 0° to 55°C (32° to 131°F)
    • Gigabit Data Rates - 0° to 40°C (32° to 104°F)
    • Storage Temperature - –25° to +65°C (–4° to 149°F)
    • Maximum Humidity Gradient - 5% to 90%
  • Immunity
    • ESD - EN61000-4-2, Level 3
    • RS - EN61000-4-3, Level 3
    • Surge - EN61000-4-5, Level 2
    • Isolation (HI-POT) - 2,121 VDC for 1 minute, 10 mA
  • Insulation Resistance
    • Input to Ground - >10 MOHM 500 VDC
    • Output to Ground - >10 MOHM 500 VDC

POE1XT Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In