507332 Intellinet Fast Ethernet Single Mode Media Converter 10/100Base-TX to 100Base-FX (SC) Single-Mode - 12.4 mi

The Intellinet Fast Ethernet Single Mode Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before — only now it can support both copper and fiber mediums.

Specifications

Standards

• StandardsIEEE 802.3 (Twisted Pair Ethernet)
• IEEE 802.3u (Twisted Pair / Fiber Optic Fast Ethernet)

General

• Media support:
  • - 100Base-TX Cat5 or higher UTP/STP RJ45, EIA/TIA 568
  • - 100Base-FX single-mode 8.3/125 µm or 8/125 µm or 10/125 µm
• Connectors:
  • - RJ45 port, 100Base-TX- Fiber SC duplex port, 100Base-FX
• Distances:
  • - 20 km / 12.4 mi. (fiber cable)
  • - 100 m / 300 ft. (RJ45 cable)
• Wavelength: 1310 nm
• Power output: -15 to -3 dBm
• RX sensitivity: ≤-32 dBm
• Signal loss: 0.3 dB/km
• MTBF > 100,000 hours
• Certifications: FCC Class B, CE

LEDs

• Power
• Link/Activity
• Full-Duplex/Collision
• 100 Mbps link speed indicator for RJ45 port
• Link indicator for fiber port

Power

• External power adapter, 5 VDC, 1 A
• Power consumption: 5 watts (maximum)

Environmental

• Metal housing
• Dimensions: 105 (L) x 70 (W) x 26 (H) mm (4.1 x 2.8 x 1.0 in.)
• Weight: 0.18 kg (0.4 lbs.)
• Operating temperature: 0 – 50°C (32 – 122°F)
• Operating humidity: 10 – 90% RH, non-condensing
• Storage temperature: -45 – 70°C (-49 – 158°F)

Package Contents

• Fast Ethernet Single Mode Media Converter
• External power adapter
• Instructions

507332 Specifications PDF