|
Specifications
Camera - Image Sensor - 1/3" progressive scan CMOS
- Min. Illumination - 0.01Lux @(F1.2,AGC ON), 0.014 Lux @(F1.4,AGC ON), 0 Lux with IR
- Shutter Speed - 1/3 s ~ 1/10,000 s
- Slow Shutter - Support
- Lens - 2.8 - 12 mm @ F1.4
- Lens Mount - Φ14
- Day & Night - IR cut filter with auto switch
- WDR - 120dB
Compression Standard - Video Compression - H.264 / MJPEG/H.264+
- H.264 Type - Main Profile
- Video Bit Rate - 32 Kbps ~ 16 Mbps
- Audio - G.711 / G.726 / MP2L2, 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps (MP2L2)
Image - Max. Resolution - 2688 x 1520
- Frame Rate - 50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720) 60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720)
- Image Enhancement - BLC / 3D DNR / ROI
- Image Settings - Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
- Day/night Switch - Auto / Schedule / Triggered by Alarm In
Network - Network Storage - NAS (Support NFS,SMB/CIFS), ANR
- Alarm Trigger - Intrusion Detection, Line Crossing detection, Motion detection, Dynamic Analysis, Tampering alarm, Network disconnect, IP address conflict, Storage exception
- Protocols - TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
- Security - One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access
- Standard - ONVIF (PROFILE S, PROFILE G), PSIA, CGI, ISAPI
General - Interface - 1 RJ45 10M/100M Ethernet interface
- Operating Conditions - -22 °F 140 °F, Humidity 95% or less (non-condensing)
- Power Consumption - Max. 5.5W (7.5W with ICR on)
- Ingress Protection - IP66
- IR Range - 66~98 feet
- Dimensions - 3.74 x 4.13 x 10.19
- Weight - 2.65 lbs
 IPHBL4-2812-W Specifications PDF
|
