ISEE-IVR-4T/12 Napco Record up to 30 days of continuous video - playback and control online, installed with plug-and-play ease

The iSee Video IVR Internet Video Recorder, ISEE-IVR-250, continuouslyrecords and stores up to 30 days of video from up to six iSee Video System cameras per account, for easy retrieval and viewing by the online subscriber. This highly advanced IVR supports high-resolution video from any iSee Video-Series Cameras (EOP, Pan/Tilt, etc) or the video from any brand analog camera connected to the iSee Video Single Channel Gateway (ISEE-SCHGW).
Video is stored at the highest resolution produced by those units (640x480 from the ISEE-VCMPT and VCAM1 and 704x480 from the ISEESCHGW). Up to four cameras’ video can be continuously recorded at the fastest frame rate of 20 FPS (frames per second). If the maximum of 6 cameras are used, the frame rate will be only slightly reduced dynamically.(Maximum storage capacity may even be increased in cases where there is little activity, as the IVR uses MPEG4 compression technology.)

Specifications

Recording

• Video Channels- Up to 6 cameras/devices or 120 frames/second max at 640 x 480 resolution (or 720x480 with SCHGW)
• Capacity- Up to 30 days with max of 6 cameras (Variable frame rate ~20fps). Max recorded days may vary depending on video activity.
• Recording Mode- Continuous
• File Format- MPEG-4
• Internet:Recording is maintained even if internet connection is not available. If the local network is available system will continue to store video.

Playback

• Method- Playback and other functions available through the NAPCO iSeeVideo web portal.
• Playback Mode- PLAY, PAUSE, FWD, REW, STOP
• Video Search- Search by date, time, alarm events
• Video Clip Export- Recorded files can be downloaded to the client’s PCfrom the WEB page.

Live View

• Video Compression- MPEG-4
• Resolution- Resolution is the same as the configured resolution of thecameras
• Frame Rate- Up to 30 fps x camera
• PT Support- Control camera through web page

Network

• Protocols- TCP/IP, SMTP, HTTP, DHCP, NTP, RTSP/RTP
• IP Configuration- DHCP Client, Static IP.
• Plug and Play- Yes (featuring NAPCO proprietary firewall crossing in/outbound)

Software

• Operating System- Embedded Linux
• Client Support- Any Browser and any Operating system thoughNAPCO iSeeVideo Portal
• Security- Username and Password SSL Authentication

Hardware

• CPU- Marvell 88F5182, 500MHz
• Flash- 16 MB
• SDRAM- 64 MB
• HDD Interface- Support two 3.5” STAT-II drives (Ships with pre-installed250GB HD)
• LAN- Marvell 88E1118, GIGA PHYRGMII, 10/100/1000 BaseT, Auto-MDIX
• LED indicators- Ready/Status, Ethernet, Disk Act, Disk Full, Disk 1, Disk2, USB 1,USB 2
• Connector- Ethernet RJ-45, 2xUSB, DC Power, Reset, Power Switch
• Power Adapter- 12V/5A, 100~240 VAC
• Certification- CE/FCC
• Dimension- 7.5” (W) x 7.1” (H) x 3.75” (L) (190mm x 180mm x 95mm)

ISEE-IVR-4T/12 Specifications PDF