NETWAY4ES Altronix Switch 4 Port PoE/PoE+ Enables 4 IP Devices over 1 structured cable Input Power PoE/PoE+/Hi-PoE Typically used with Netway1D

Altronix NetWay4ES 4-Port PoE/PoE+ switch is designed for installation at the IDF (Intermediate Distribution Frame). NetWay4ES allows for system expansion by accommodating up to four (4) IP cameras/devices over a single CAT5 or higher structured cable. Power up to 60W is provided by NetWay1D midspan injector or 30W by NetWay8/NetWay16 midspan, or any IEEE 802.3at standard midspan/endspan typically located at the MDF (Main Distribution Frame).

Specifications

Input

• Up to 60W is provided by NetWay1D midspan injector or 30W by NetWay8/NetWay16 midspan or any IEEE 802.3at standard midspan/endspan.

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e.
• Distance: up to 100m.
• Speed : 10/100BaseT, half/full duplex, auto negotiation.

Indicators (LED)

• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active.

Agency Listings

• UL/cUL - UL60950-1 (Information Technology Equipment).
• CE - European Conformity.

Physical and Environmental

• Dimensions (W x L x H) - 1.7” x 5.23” x 8.42” (43.18mm x 132.84mm x 213.87mm).
• Product Weight - 1.1 lbs. (0.5 kg).
• Shipping Weight - 1.7 lbs. (0.77 kg).
• Operating Temperature - 60W : -40ºC to 75ºC (-40ºF to 167ºF), Greater than 60W : -40ºC to 50ºC (-40ºF to 122ºF).
• Storage - -40ºC to 70ºC (-40º to 158ºF).
• Relative Humidity - 85% +/-5%.
• Operating Altitude - -304.8 to 2,000m.

NETWAY4ES Specifications PDF

NETWAY4ES Manual