LHSRC3 Cooper Wheelock Exceder LED3 Horn Strobes

The Wheelock ExcederTM LED3 horns, horn strobes, and strobes by Eaton feature an advanced power saving LED technology in a sleek, modern, single-gang enclosure that will provide high energy efficiency and an aesthetically pleasing low profile design that will blend with the building‘s interior décor.

Specifications

Physical

• Material - Red or white textured UV stabilized, colored impregnated engineered plastic. Exceeds 94V-0 UL flammability rating
• Weight - 0.35 lbs.
• Lens - Light Emitting Diode (LED) in a rugged Lexan lens
• Dimensions - 4.53”H x 2.76 W x 1.27” D; Trimplate: 5.25” H x 4.58W x 0.32 D
• Operating Temperature - Indoor: 32°F to 122°F (0°C to 50°C) and maximum humidity of 93%

Mounting & Wire Connections

• Mounting (indoor only) - Wall-mount applications only. LHN3 can be used for wall and ceiling-mount applications. Single-gang, Exceder LSBB backboxes or to 4” square with adapter kit
• Wire Connections - #12 through #18 AWG

Power & General

• Operating voltage - 12 VDC/VFWR: 8 - 17.5 VDC/VFWR; 24 VDC/VFWR: 16 - 33 VDC/VFWR (12 VDC LHN3 models only)
• Strobe Output Rating - UL 1971, ULC S526: Selectable 15, 30, 75, 110 candela output
• Strobe Flash Rate - Strobes are designed to flash at 1 flash per second
• Synchronization Models - Strobes can be synchronized with Wheelock’s DSM Sync Modules, PS Power Supplies or SAFEPATH products, using Wheelock patented sync protocol
• Temporal Audible Pattern - Selectable Continuous or Code 3 Horn tone: The Code 3 temporal pattern (1/2 second on, 1/2 second off, 1/2 second on, 1/2 second off, 1/2 second on, 1-1/2 off and repeat) is specified by ANSI and NFPA 72 for standard emergency evacuation signaling.

LHSRC3 Specifications PDF