CNGE3FE8MSK Comnet Hardened 3 TX/FX SFP 1000Mbps and 8 Port 10/100Mbps TX Ports Managed Switch kit Includes Hardened Power Supply PS-AMR2-12 and 2 SFP-6

The ComNet CNGE3FE8MS has three 100/1000Base-FX SFP* ports and eight 10/100Base-TX ports. Two of the SFP ports support 2.5 Gbps SFPs for high speed communication in bandwidth intensive applications. All SFP ports utilize ComNet SFP modules for fiber and connector type and distance. The ComNet exclusive Port Guardian feature provides additional cyber security protection by enabling physical port lockout in the event that an existing cable is disconnected and prevents a potential network incursion using common spoofing techniques.

Specifications

Connectors

• 10/100Base-TX Ports - 8 × RJ-45
• 100/1000Base-X Port - 3 × SFP¹
• Serial Console Port - USB Type B Connector (115200bps, 8, N, 1)
• Power - 2 × 2-Pin Terminal Block
• Fault Relay - 3-Pin Terminal Block

Switch Properties

• Switching Latency - 7 μs
• Switching Bandwidth - 13.6 Gbps
• DRAM - 1GB
• Flash - 128Mb
• VLANs - Voice, Private, Multicast
• Max. Available VLANs - 256
• IGMP multicast groups - 128 for each VLAN
• Port rate limiting - User Defined
• Processing - Store-and-Forward
• Priority Queues - 8
• Network Redundancy - STP RSTP MSTP ERPS
• MAC Table - 8K MAC Addresses
• Jumbo Frame - Up to 9.6K Bytes
• Static Routing - 32 Routes

Security Features

• Device Binding Security Feature
• Enable/Disable Ports, MAC based port security
• Port-Based Network Access Control (802.1x)
• VLAN (802.1Q) To segregate and secure network traffic
• Radius Centralized Password Management
• SNMPv3 Encrypted Authentication and Access Security
• https / SSH enhance network security
• Switch/port based, NAS, ACL, ARP inspection and IP sourceguard
• AAA radius server authentication
• TACACS+
• NTP
• Supports Secure Copy Protocol SCP for secure file transfer

Power

• Input Power - Redundant 12 to 57 VDC (non-PoE model), Redundant 12 to 24 VDC (POE/24 model), Redundant 48 to 57 VDC (POE & POEHO models)
• Power Consumption - 8 W Max, non-PoE, 250 W Max w/ PoE+ (POE model), 150 W Max w/PoE+ @ 24 VDC (POE/24 model), 120 W Max w/PoE+ @ 12 VDC (POE/24 model), 370 W Max w/ PoE++ (POEHO model)
• Overload Current Protection - Present
• Reverse Polarity Protection - Present

Mechanical

• Indicating LEDs - Power/Fault Indicators, Alarm Indicator, RJ45 Port Indicator, SFP Port Indicator, PoE Indicators
• Size(H × W × D) - 6.0 × 3.5 × 4.5 in (15.24 × 8.89 × 11.43 cm)
• Enclosure - IP30
• Installation - DIN-Rail or Wall Mount
• Weight - 2.6 lb / 1.2 kg

Environmental

• Storage Temperature - -40 to +85º C
• Operating Temperature - -40 to +75º C, Functional to +85 ̊ C
• Operating Humidity - 5% to 95% Non-condensing
• MTBF - >100,000 hours

Ethernet Standards

• IEEE 802.3 for 10BASE-T
• IEEE 802.3u for 100BASE-TX and 100BASE-FX
• IEEE 802.3ab for 1000Base-T
• IEEE 802.3z for 1000BASE-X
• IEEE 802.3x for Flow control
• IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
• IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE up to 30 watts per port (CNGE3FE8MSPOE and CNGE3FE8MSPOEHO Only)
• IEEE 802.1p for COS (Class of Service)
• IEEE 802.1Q for VLAN Tagging
• IEEE 802.1D for STP (Spanning Tree Protocol)
• IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
• IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
• IEEE 802.1x for Authentication
• IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
• IEEE 802.3az Energy Efficient Ethernet
• ITU-T G.8032v1/v2 Ethernet Ring Protection Switching (ERPS)

Regulatory Compliance

• EMI - FCC Part 15, CISPR (EN55022) class A
• EMS - EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
• Shock - IEC60068-2-27
• Free Fall - IEC60068-2-32
• Vibration - IEC60068-2-6
• Safety - EN60950-1
• Rail - EN50121-4
• Traffic - NEMA TS2

CNGE3FE8MSK Specifications PDF