TR515 Nitek Active Receiver for UTP transmission from 100 to 1,500 ft

The TR515 is designed for operation over Category twisted pair cable and requires the use of a transmitter unit. The unit works equally well over existing communication and computer networks or newly installed cable. Advanced receiver electronics provide immunity from ground loop, hum and noise to produce maximum video quality with virtually no loss. A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be “fine-tuned” for any cable. This digital adjustment technology provides easy adjustment for optimum performance over the entire operating range. The wide dynamic adjustment also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs.

Specifications

• Size - 1.6” H x 4.3” W x 2.4” D
• Power Requirements - 12 to 24 VAC or VDC, 100mA
• Operating Distance - 100 to 1,500 ft
• Input - Balanced low voltage current loop
• Output - 1 Vpp composite video Monochrome or Color
• Common Mode Rejection - >70dB
• Video Format - PAL, SECAM, NTSC, RS170, CCIR (Color or B/W)
• Operating Frequency - DC to 10 MHz
• Wire Size - 26 to 18 AWG twisted pair
• DC Loop Resistance - 51 Ohms/1,000 ft (max)
• Nominal Capacitance - 17pF/ft
• Impedance - 100 Ohms +/- 20%
• Category Wire - 2 or better
• Temperature Range - -20°C to +65°C
• Humidity Range - 0 to 98%, non-condensing
• Enclosure Material - Black, ABC flame retardant plastic
• Twisted Pair Connection - Screw terminals
• Shipping Weight - 2 lbs

TR515 Specifications PDF

TR515 Installation Manual