STI-1130CP6 STI Stopper II with Red Horn and Clear Spacer - 6 Pack

This patented protective cover has helped stop false fire alarms around the world for over 30 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind.
STI-1130 consists of a clear, tamperproof, super tough polycarbonate cover, frame, spacer and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught.
The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Specifciations

Polycarbonate Enclosure

• Flammability - UL94 V-2
• Wall Thickness - .095 inches
• NEMA Rating - Meets NEMA 3R when mounted to smooth non-masonry surfaces

Gaskets

• Closed Cell IV2 with pressure sensitive adhesive
• Replace after 5 years

Horn

• Low (95 dB @ 1 ft.)
  • 9V - 96mA
  • 12V - 107mA
  • 24V - 125mA
• High (105 dB @ 1 ft.)
  • 9V - 130mA
  • 12V - 145mA
  • 24V - 182mA
• Min. Operating Req.
  • 9V- 2V @ 20mA
  • 12V - 4V @ 20mA
  • 24V - 4V @ 20mA

Relay

• Relay
  • 9V - 23mA
  • 12V - 25mA
  • 24V - 29mA
• Min. Activation Voltage
  • 9V - 3.7V
  • 12V - 5.8V
  • 24V - 5.8V
• Reset Voltage
  • 9V - 1.5V
  • 12V - 3.3V
  • 24V - 3.3V
• Dry Contact Rating (type Form “C”)
  • 9V - <30V, 1A
  • 12V - <30V, 1A
  • 24V - <30V, 1A

Temperature Range

• -40° to 120°F (-40° to 49°C)
• For temperatures below -4°F (-20°C) recommend using remote power source

Warranty

• Three year guarantee against breakage of polycarbonate housing in normal use (one year on electro mechanical and electronic components).

STI-1130CP6 Specifications PDF

STI-1130CP6 Manual