F-8KIT1 NAPCO Complete Freedom Kit-DISCONTINUED

The revolutionary code-free system as easy as locking the door, eliminates callbacks, account attrition and 100% of false alarms caused during exit/entry (the times 85% all false alarms occur in traditional systems.)

Napcos Freedom System installs in as little as an hour and uses all standard Gemini Wireless. Starting with a conventional, NAPCO downloadable 8-zone hybrid control, it features a unique, deadbolt lock interface and codeless, easy-install Freedom Touchpad with built in UL siren and built in UL pet PIR sensor.

Nothing to touch on the door - lock insert interfaces with existing deadbolt locks and transmits wirelessly.

Specifications:

• Max. number of code-free, key-controlled doors, 4.
• Max. number of Freedom Touchpads (any): 2
• Each of 2 Freedom Touchpads can monitor 2 door locks each, each using F-2D Wireless Lock 2nd Door Interface kit. (Note: Transmission range of F-2D Lock Interface to touchpads built-in receiver is approximately 600 feet open air).
• Operating temperature: 0-49 degrees C (32-120 F)
• Input power: 16.5 VAC plug-in 20VA transformer
• Loop voltage: 5 Volts
• Loop current: 1.1 mA
• Loop resistance: 300 ohms per zone (max.)
• Alarm output: Burg: 12 VDC, 2A (max.). Fire: 12 VDC, 65 mA
• Combined standby current: 500 mA residential burglary (4 hour standby); 500 mA residential fire (4 hour standby); 120 mA residential fire (24 hour standby)
• Current limiting: Burg/fire: 2.25A
• Output: 2A, max.-burg; 125mA, max.-fire
• Maximum charging current: 165mA
• Housing: 8-3/8 x 10-1/4 x 3 inch (H x W x D)
• Required battery: 12V 4AH rechargeable

F-8KIT1 Spec Sheet