TIC600 Uniview Heat-Tracker Series Advanced Thermal Screening Body Temperature Detector with Blackbody and 2 Tripods

The Advanced Thermal Mass Screening Solution is essential in stopping the spread of Coronavirus. The device is designed for mass body temperature detection in areas of large footfall such as large optices, schools, hospitals and other premises with large footfall. With an accuracy of ± 0.3 ° C, the tried and tested technology are designed to filter out false alarms and produce only accurate data.

The Software uses Intelligent Infrared technology and pinpoint identification to detect a person with a raised temperature/ fever. Images are viewed on a PC or Laptop via software provided (Please see specification for minimum PC spec)

The infrared technology transmits different colors based on the temperatures that are being emitted in the image – similar to thermal imaging cameras. The pinpoint technology will identify a person entering the image and lock onto them and display their temperature directly onto the image.

An alarm can also be set to activate when a person above this temperature crosses the image. This makes it even easier for an operator to establish if a person needs medical examination.

Specifications

Camera

• Sensor Type - Uncooled Focal Plane Arrays
• Pixel size - 25μm
• Maximum image size - 384 × 288
• Video frame rate - Max 25fps
• NETD - ≤60mk
• Response waveband - 8~14μm
• Focal length - 18mm
• Iris - F1.0
• Angle of View (H*V) - 25°*19°
• Detection distance - 3~10 meters

Visible

• Sensor - 1/1.8"，progressive scan，CMOS
• Focus - Manual
• Iris - Max F1.6
• Minimum illumination - Colour : 0.001Lux(F1.6, AGC ON), B/W : 0.0002Lux(F1.6, AGC ON)
• S/N - ＞52dB
• Defog - Optical & digital
• Day/Night - IR-cut filter with auto switch (ICR)
• Video Frame rate - 1920 x 1080, Max 30fps
• WDR - 120dB
• OSD - Up to 8 OSDs
• SD card - Micro SD, up to 256GB
• ANR - Support
• Network protocols - IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, PPPoE, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, 802.1x, SNMP, QoS
• Focal length - 3.8~16mm

Blackbody

• Accuracy - ±0.2°C (Single point)
• Stability - ±(0.1~0.2)°C/30min
• Dimension - 135mm x 135mm x150mm
• Power - 220V AC 50Hz
• Power consumption - 60W
• Radiation area - φ70mm

Temperature measurement accuracy

• Environment temperature range - 16°C~32°C
• Target temperature range - 32°C~42°C
• Temperature measurement accuracy - ≤±0.3°C

Interface

• Infrared machine head - Aviation plug
• Network interfaces - RJ45

Power

• Power - DC12V
• Power consumption - ≤15W

Weight

• Infrared machine head - <5Kg
• Blackbody - <3.5kg

Function

• Alarm - Multi abnormal temperature point alarm and automatic capture
• Capture - Capture when alarm is triggered
• Temperature display - Simultaneous display of temperature in infrared and visible light images
• Correction of body and surface temperature - Support automatic temperature calibration

Environmental adaptability

• Working humidity ≤90%RH(non-condensing)

Notes

• Minimum PC requirement - Windows 7/10, I5 9600, 8GB Memory, 1TB

TIC600 Specifications PDF