KR500BT ZKTeco USA Indoor/Outdoor Mobile-ready Smart Card Reader with Bluetooth

KR500BT is a “mobile-ready” outdoor IP67-rated smartcard reader which additionally supports Bluetooth for smart-phone users preferring not to carry an actual smart card.

Specifications

• Technology - Contactless smart-card and Bluetooth Low Energy (BLE)
• Supported card types - 13.56 MHz (contactless smart-card) and 2.4 GHz (BLE)
• Mounting - Either narrow flat surfaces or single gang wall boxes
• Indoor & Outdoor Installation - Electronics sealed in weather and tamper-resistant epoxy potting
• Keypad - N/A
• LED indicator - Blue, red, green, amber, and off
• Audio indicator - Beep
• Wiegand Inferface - Wiegand-Out port
• Power Supply - +8 – 14V DC
• IP-rating - 67
• Operating Temperature - –40° F to 149° F (–40° C to +65° C)
• Operating Humidity - 20% - 80%
• KR503E Dimensions (H×W×D) - Mullion: 1.7" W × 4.7" H × 1.2" D, Switch Plate: 3" W × 5.1" H × 1.2" D
• Certifications - FCC, ICC, CE
• Current draw - 40 mA typical @ 12V DC, 195 mA peak
• Read range - Up to 1.5 inches (38 mm)
• Cabling - 24 AWG minimum, multi-conductor stranded with an overall foil shield

KR500BT Specifications PDF