ISEC-KIT3 NAPCO iSecure Dual Path Cell/IP Verizon LTE Alarm System Kit with 7" Security Touchscreen, Wireless PIR and 2 x Wireless Window/Door Contacts

The iSecure System centers on the advanced multifunction iSecure Go-Anywhere Smart Hub with up to 80 zones, for intrusion & fire, with built in dual path StarLink Cellular/IP LTE alarm reporting, 85db siren, wireless receiver, + Z-Wave controller in both Touchscreen Kits. Like the name says,the hub goes anywhere, wall-mount or tabletop, so it can be positioned for best signal reception and out of harm’s way, for less vulnerability to smashing/disabling the system. (Signal strength metering is built in, too.)

Designed for a professional installation in as little as an hour, iSecure also features cloud-based smartphone dealer-programming with easy dropdown menu selections for customizing system configuration and options in minutes; plus the Go-Anywhere Hub uses a professional 4Ah battery for longest power outage protection – 24-hours standby time, avg. The dual path cellular/IP communicator built-in also features Napco StarLink’s Signal Boost circuitry and internal dual diversity antennae, to maximize signal absorption and null avoidance, for best performance, even in fringe areas & on low-powered LTE networks.

Ideal for any application & budget, iSecure Series Systems feature a choice of three all-inclusive kits, complete with Go-Anywhere Hub, either a wireless keypad or a 4” or 7” multifunction color touchscreen, plus two wireless window/door sensors and wireless PIR. There’s also a full line of iSecure optional accessories to customize and extend any system including, keyfob, wireless glassbreak, smoke, heat and CO detectors, extra plug-in siren(s), and a takeover module to add-in wired zones/devices zones from a preexisting wired system.

Specifications

Go-Anywhere Hub

• Dimensions - 12.25" W x 9.5"H x 3.38" D
• Installation - Wall mount, or use free-standing as tabletop unit, no-mar base pads (supplied)
• LED Indicators - integral red, yellow, green LEDs & corresponding icons indicate various system conditions and/or status: RF signal-strength metering, status, fire, trouble, bypassed, wireless sensor transmissions, operational status, IP/WiFi Network metering/status
• Integrated Functions - Cell/IP Reporting w/ dual internal LTE antennae; 10/100 Ethernet Interface (for backup central sta. communications & notifications), Wireless Radio & 319MHz Receiver; 85dB Siren, Voice Speaker w/ 4 Volume Levels. Also, Z-Wave Controller in Touchscreen KITs (KIT2, KIT3 Models)
• Operating Temperature - 0-49°C (32-120°F)
• Input Power - 16.5VAC via CLASS 2 Plug-In 16.5VAC transformer
• Loop Voltage - 10-13VDC
• Loop Current - 2.4mA with 2.2K Ohm end-of-line resistor (Model EOL2.2K); 5mA for 2-wire smoke-sensor zones
• Loop Resistance - 300Ω max. 50Ω for 2-wire smoke-sensor zones
• Supervised BELL output terminal for burg/fire alarm - 12.5-11.0 300mA Max combined output bell + PGM
• Combined Standby Current - Remote Power + Aux. Power + Reset Relay Power: 2.4mA
• Standby Time & Backup Battery - 12VDC 4Ah rechargeable battery required, for power outage protection, from >24hrs to <18hrs, depending on Kit, and use of network &/or AC. Consult WI2240 for detail. For longer duration also use with 12VDC, 5AH models
• PGM Output - 100mA max, 12.5-11.0VDC
• 7" Touchscreen - uses 1A, 12V plug in wall transformer, power supply provided
• Maximum Number of Keypads - 5

Wireless Window/Door Transmitter

• Dimensions - 2.5" H x 1" W x 0.4" D
• Power - 3-volt lithium battery supplied, CR/DL2032
• Nominal Battery Life - 5 years
• Supervised - Reports low-battery voltage to receiver

Wireless PIR

• Dimensions - 4.5" H x 2.5" W x 1.7" D (11.4cm x 6.4cm x 4.3cm)
• PIR Coverage (L x W) - 50' x 50' (15.2m x 15.2m) at 20°C (68°F), typ.
• Operating Temperature - 0° to +50°C (32° to 122°F)
• Mounting - Wall or corner, 10' (3m) max.

7" Connected Home Multifunction Touchscreen

• Dimensions - 5.38 " W x 7.87" H x 0.88" D (13.7 x 20 x 2.2 cm)
• Operating Temperature - 32-120°F (0-49°C)
• Speaker - 1 Integral 2W
• Electrical Ratings - Screen on, idle - 300mA, Screen, in use - 380mA. (also see WI for details)
• CPU - Quad core processor, (up to 1.6GHz)
• Wi-Fi - 802.11b/g/n with integral antenna
• LCD Size - 7 inch digital screen
• Resolution Ratio - 1024 x 600 x, 16:9 aspect ratio, 16.7 million colors
• Pixels - 1024 x RGB (3) x 600
• Touchscreen - Digital and full-screen, capacitive

ISEC-KIT3 Specifications PDF