The cart is empty.
Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.

RGM75-C8PZ/T4-C LifeSafety Power ProWire Mercury 4 Door 6 Amp 12VDC 8 Lock Control Access Control Power Supply in UL Listed Indoor 19" W x 3.5" H x 20.5" D Rackmount Electrical Enclosure

  • Guarantees uniform installations across an enterprise
  • Pre-installed wire harness for panel power, lock control, faults and tamper switch
  • Point to point wiring; labeled, color coded, twisted pair, shielded communication
  • Tie wrap cable management
  • Managed systems monitor power, batteries and eight outputs
  • UL294, ULC S319 joint LSP / Mercury integrated listing
More details...
Availability: 2 to 3 Week Lead Time
Ordering Notes: Dealers Only
MSRP Price: $1,727.00
Online Price: $1,152.00

DWG Dealer Price : ---

Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.

Previous Item   Next Item
Product Details

These ProWire Unified Power rack mount models are single and dual voltage access power systems, precision wired for Mercury controllers. ProWire enables the specification and installation of standardized access power equipment across an enterprise for uniform operation, maintenance and servicing.

The C4, C8 or M8 control module provide access control inputs capable of voltage or dry contact activation and outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the power supply fire alarm interface. The D8 module provides eight auxiliary outputs. In dual voltage systems each output is configurable for 12 or 24VDC operation.


Power Supplies

  • FPO75 Power supply board, 2A/24V
  • B100 Secondard voltage module, 2A/12V class 2 power limited
  • Input 120/230VAC 50/60Hz | 83 Watts (0.69A)
  • Overload and short circuit protection
  • Over temperature protection
  • Polarized AC power supply disconnect

Battery Charging

  • Independent built-in charger for sealed lead-acid or gel type batteries
  • Microprocessor dual rate charging of 12 or 24V battery sets
  • Automatic switchover to standby battery when AC fails
  • Zero voltage drop when switched over to battery backup


  • AC Fault (form "C" contacts)
  • System Fault (form "C" contacts)
  • System Fault conditions: Low or no battery | short to earth ground | power supply failure

Distribution Modules

  • C8 8 relay lock control outputs, fused at 3A per output


  • Size - 2U rack mount (19.00"W x 3.50"H x 20.50"D)
  • Weight - 24 lbs.
  • Z bracket wire management articulating arm

Wiring Suffix

  • T4-C - T = Tie Wrap, 4 = Door count, C = All MR52s

Regulatory Compliance

  • USA/Canada: UL294, UL1076 | ULC S319 | CSA C22.2 #107.1 | FCC Part 15 | CSFM
  • International: CE: IEC 62368-1:2014, EN55032:2015, EN61000-3-2:2014, EN61000-3-3:2013, EN55024:2010 +A1:2015, India BIS IS13252(Part1):2010 | Mexico NOM 001:2018

RGM75-C8PZ/T4-C Specifications PDF

Product Reviews

Write your own review


Rate this product:

DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In