RGM75-C8PZ/T4-A LifeSafety Power ProWire Mercury 4 Door 6 Amp 12VDC 8 Lock Control Access Control Power Supply in UL Listed Indoor 19" W x 3.5" H x 20.5" D Rackmount Electrical Enclosure

These ProWire Unified Power rack mount models are single and dual voltage access power systems, precision wired for Mercury controllers. ProWire enables the specification and installation of standardized access power equipment across an enterprise for uniform operation, maintenance and servicing.

The C4, C8 or M8 control module provide access control inputs capable of voltage or dry contact activation and outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the power supply fire alarm interface. The D8 module provides eight auxiliary outputs. In dual voltage systems each output is configurable for 12 or 24VDC operation.

Specifications

Power Supplies

• FPO75 Power supply board, 2A/24V
• B100 Secondard voltage module, 2A/12V class 2 power limited
• Input 120/230VAC 50/60Hz | 83 Watts (0.69A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Battery Charging

• Independent built-in charger for sealed lead-acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fault (form "C" contacts)
• System Fault (form "C" contacts)
• System Fault conditions: Low or no battery | short to earth ground | power supply failure

Distribution Modules

• C8 8 relay lock control outputs, fused at 3A per output

Enclosures

• Size - 2U rack mount (19.00"W x 3.50"H x 20.50"D)
• Weight - 24 lbs.
• Z bracket wire management articulating arm

Wiring Suffix

• T4-A - T = Tie Wrap, 4 = Door count, A = MR52 / EP1502

Regulatory Compliance

• USA/Canada: UL294, UL1076 | ULC S319 | CSA C22.2 #107.1 | FCC Part 15 | CSFM
• International: CE: IEC 62368-1:2014, EN55032:2015, EN61000-3-2:2014, EN61000-3-3:2013, EN55024:2010 +A1:2015, India BIS IS13252(Part1):2010 | Mexico NOM 001:2018

RGM75-C8PZ/T4-A Specifications PDF