Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

FPO150/250-2C83D8E6V1/T16-B LifeSafety Power ProWire Vertx 16 Door 12 Amp 12VDC 10 Amp 24VDC 16 Lock and 24 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure

SKU: FPO150/250-2C83D8E6V1/T16-B
  • Guarantees uniform installations across an enterprise
  • Pre-installed wire harness for panel power, lock control, faults and tamper switch
  • Point to point wiring; labeled, color coded, twisted pair, shielded communication
  • Tie wrap or wire duct cable management options
  • Managed systems monitor power, batteries and sixteen outputs
  • UL294, ULC S319 listing
More details...
Ordering Notes: Dealers Only
MSRP Price: $3,665.00
Online Price: $2,444.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



FPO150/250-2C83D8E6V1/T16-B LifeSafety Power ProWire Vertx 16 Door 12 Amp 12VDC 10 Amp 24VDC 16 Lock and 24 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure
FPO150/250-2C83D8E6V1/T16-B LifeSafety Power ProWire Vertx 16 Door 12 Amp 12VDC 10 Amp 24VDC 16 Lock and 24 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 23" W x 30" H x 6.5" D Electrical Enclosure
Previous Item   Next Item
 
Product Details

These ProWire Unified Power wall mount models are single and dual voltage access power systems, precision wired for HID controllers. ProWire enables the specification and installation of standardized access power equipment across an enterprise for uniform operation, maintenance and servicing.

The C8 or M8 control modules provide sixteen access control inputs capable of voltage or dry contact activation, and sixteen outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the power supply fire alarm interface. The D8 modules provide sixteen auxiliary outputs. In dual voltage systems, each output is configurable for 12 or 24VDC operation.


Specifications


Power Supplies

  • FPO150 Power supply board 12A/12V, 150W
  • FPO250 Power supply board 10A/24V, 250W
  • Input 120/230VAC 50/60Hz | Single voltage 142 Watts (1.42A) | Dual voltage 452 Watts (3.77A)
  • Overload and short circuit protection
  • Over temperature protection
  • Polarized AC power supply disconnect

Battery Charging

  • Independent built-in charger for sealed lead-acid or gel type batteries
  • Microprocessor dual rate charging of 12 or 24V battery sets
  • Automatic switchover to standby battery when AC fails
  • Zero voltage drop when switched over to battery backup

Supervision

  • AC Fault (form "C" contacts)
  • System Fault (form "C" contacts)
  • System Fault conditions: Low or no battery | short to earth ground | power supply failure

Distribution Modules

  • D8 (X3) 16 auxiliary outputs, fused at 3A per output (third D8 dedicated power to HID controllers)
  • C8 (X2) 16 relay lock control outputs, fused at 3A per output

Enclosures

  • Size - 30.00H x 23.00W x 6.50D in. (76.20 x 58.12 x 16.51 cm)
  • Weight - 47 lbs.

Wiring Suffix

  • T16-B - T = Tie Wrap, 16 = Door count, B = All V100's

Regulatory Compliance

  • UL / ULC - UL294, ULC S319
  • CSA / FCC - CSA C22.2 #107.1 | FCC Part 15, CSFM

FPO150/250-2C83D8E6V1/T16-B Specifications PDF


Product Reviews

Write your own review

 

Rate this product: