RC150-C16 LifeSafety Power RC150 Series 12 Amp 12VDC 16 Lock Control Access Control and CCTV Power Supply in UL Listed Indoor 19" W x 3.5" H x 14" D Rackmount Electrical Enclosure

FLEXPOWER RC SERIES is a 12/24VDC single or dual voltage, rackmount power system with multiple control outputs specifically designed for use within the access, security, CCTV, and mass notification segments of the life safety industry. Multiple output options provide for simple power distribution for auxiliary equipment power, and controlled power distribution for lock and signaling control. Models ending in “/E” are preset for a 230VAC input from the factory.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz
• Thermal overload protection / Short circuit protection

Output Power

• 150 Watts: 12 amps at 12 VDC or 6 amps at 24 VDC

Output Distribution

• Eight or sixteen lock outputs, fused at 3A each (C8, C16) - Individually selectable Mag Lock/Strike (Fail-Safe, Fail-Secure) solid state fuse protected outputs

Supervision

• AC input, DC1, and DC2 output
• Low battery and battery presence supervision (form C contacts)
• AC fail supervision (form C contacts)
• System Fault, AC Fault, Ground Fault, Reverse Battery

External Indicators

• AC on master on/off switch
• Front Panel Individual Output Status LEDs

Battery Charging

• Maximum charge current 2.0 amp
• Independent built-in charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Regulatory Compliance

• UL294 / UL603 / ULC S318 / ULC S319 / CSA C22.2 #107.1 / CSA 22.2 #60950 / FCC / CE

BTU Rating

• 66 BTU/Hr

Physical Dimensions

• 2U rack mount (19.00"W x 3.5"H x 14"D)
• Weight 19 lbs.

RC150-C16 Specifications PDF