FPO75/150-C8PD8E4A LifeSafety Power AMAG 8 Door 6 Amp 12VDC 12 Amp 12VDC 8 Lock Class II and 8 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 20" W x 24" H x 6.5" D Electrical Enclosure

ACLASS Unified Power Systems combine FlexPower power modules alongside AMAG access hardware in one compact and secure access power solution. This unit is a 225W dual voltage 12V and 24V DC access power system.

C8 lock control module provide eight access control inputs capable of voltage or dry contact activation, and eight outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. D8 module provides eight auxiliary outputs and each output is configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 253W Watts (2.11A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• PS1: FPO75: 12V/6A or 24V/3A | 75 Watts
• PS2: FPO150: 12V/12A or 24V/6A | 150 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 lock outputs, fused at 3A each
• 8 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 99 BTU/Hr

Battery Charging

• Independent built-in charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges battery sets of up to 40Ah (FPO75) and 80Ah (FPO150) within UL limit
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• C8 output and fault status
• D8 output status

Regulatory Compliance

• UL294, UL603, UL1076
• ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
• FCC Part 15, Subpart B / CSFM Approved

Enclosure Dimensions

• Size: 24.00H x 20.00W x 6.50D in. (61.00 x 50.00 x 16.50 cm)
• Weight: 25 lbs.

Access Mounting

• Fits either two (2) M4000 or one (1) 8DBC, 8DC, 4DBC or 2DBC

FPO75/150-C8PD8E4A Specifications PDF