FPO250-2D8E4-9DM2 LifeSafety Power DMP 18 Door 20 Amp 12VDC 16 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 20" W x 24" H x 6.5" D Electrical Enclosure

DMP Unified Power Systems combine FlexPower power modules alongside DMP 734/734N Wiegand Interface Modules in one compact and secure UL Listed solution.

The FPO Power Supply / Battery Charger provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated.

For access or lock power, two D8 modules provide sixteen fused outputs rated at 3A per output, each individually programmable for constant output or FAI disconnect.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 282 Watts (2.35 Amps)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO250: 12V/20A or 24V/10A | 250 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 16 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 66 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• D8: DC output

Regulatory Compliance

• UL294, UL603, UL1076, ULC S318, ULC S319
• CSA C22.2 #107.1, CSA 22.2 #60950
• CSFM / FCC Part 15, Subpart B, CE

Enclosure Dimensions

• Size: 24.00H x 20.00W x 4.50D in. (61.00 x 50.00 x 11.50 cm)
• Weight: 25 lbs.

Access Panel Mounting

• Pre-installed brackets mount two (2) DMP modules per bracket

FPO250-2D8E4-9DM2 Specifications PDF