The cart is empty.
Dealers. First. Always.
DWG

FPO75-B100C8D8E2-3DM2 LifeSafety Power DMP 6 Door 2 Amp 12VDC and 24VDC 8 Lock and 8 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

SKU: FPO75-B100C8D8E2-3DM2
  • 120 or 230 VAC input
  • 12 and 24 VDC outputs
  • On board Fire Alarm Interface
  • Continuous and resettable DC
  • Eight auxiliary, fused at 3A each
  • Eight Lock control, fused at 3A each
  • Increased power, multiple voltages
  • Additional distribution outputs
  • Network monitoring and reporting
More details...
Availability: 2 to 3 Week Lead Time
Ordering Notes: Dealers Only
MSRP Price: $766.00
Online Price: $511.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

DMP Unified Power Systems combine FlexPower power modules alongside DMP 734/734N Wiegand Interface Modules in one compact and secure UL Listed solution. This unit is a 75W 12V and 24V DC dual voltage access power system.

The C8 lock control module provides eight access control inputs capable of voltage or dry contact activation, and eight fused outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. One D8 module provides eight fused outputs and each output is configurable for 12 or 24VDC operation.


Specifications


Input Power

  • Input 120/230 VAC 50/60 Hz | 83 Watts (0.70 Amps)
  • Overload and short circuit protection
  • Over temperature protection
  • Polarized AC power supply disconnect

Output Power

  • 2A@12V and 2A@24V DC, 75W maximum combined output power
  • Outputs: Continuous (DC1) Resettable (DC2)
  • 8 controlled outputs, fused at 3A each
  • 8 auxiliary outputs, fused at 3A each
  • 120 mV output voltage ripple
  • System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

  • Independent built-in 1A charger for sealed lead acid or gel type batteries
  • Microprocessor dual rate charging of 12 or 24 V battery sets
  • Automatic switchover to standby battery when AC fails
  • Zero voltage drop when switched over to battery backup

Supervision

  • AC Fail (form "C" contacts)
  • System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure

Visual Indicators

  • AC input, DC1 and DC2 output
  • System fault | AC fault | Short to earth ground | Reverse battery polarity
  • Fire Alarm Input activated
  • B100: DC input / output and fault
  • C8: DC output and fault
  • D8: DC output

Regulatory Compliance

  • UL294, UL603, UL1076, ULC S318, ULC S319
  • CSA C22.2 #107.1, CSA 22.2 #60950
  • CSFM / FCC Part 15, Subpart B, CE

Enclosure Dimensions

  • Size: 20.00H x 16.00W x 4.50D in. (50.00 x 40.00 x 11.50 cm)
  • Weight: 18 lbs.

Access Panel Mounting

  • Pre-installed brackets mount two (2) DMP modules per bracket

FPO75-B100C8D8E2-3DM2 Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In