FPO75-C4E1-2DM2 LifeSafety Power DMP 4 Door 6 Amp 12VDC 4 Lock Control Access Control Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

DMP Unified Power Systems combine FlexPower power modules alongside DMP 734/734N Wiegand Interface Modules in one compact and secure UL Listed solution. This unit is a 75W 12V and 24V DC dual voltage access power system.

The C4 lock control module provides four access control inputs capable of voltage or dry contact activation, and four fused outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 83 Watts (0.70 Amps)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO75: 12V/6A or 24V/3A | 75 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 4 lock outputs with inputs, fused at 3A per output
• 120 mV output voltage ripple
• System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

• Independent built-in 1A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges up to 40Ah battery sets within UL limit
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• C4: DC output and fault

Regulatory Compliance

• UL294, UL603, UL1076, ULC S318, ULC S319
• CSA C22.2 #107.1, CSA 22.2 #60950
• CSFM / FCC Part 15, Subpart B, CE

Enclosure Dimensions

• Size: 14.00H x 12.00W x 4.50D in. (35.00 x 31.00 x 11.50 cm)
• Weight: 14 lbs.

Access Panel Mounting

• Pre-installed brackets mount two (2) DMP modules per bracket

FPO75-C4E1-2DM2 Specifications PDF