FPO150-B100C8PD8PE8H LifeSafety Power Honeywell 8 Door 4 Amp 12VDC and 24VDC 8 Lock and 8 Auxiliary Class II Distribution Outputs Access Control Power Supply in UL Listed Indoor 30" W x 36" H x 6.5" D Electrical Enclosure

HCLASS Unified Power Solutions are engineered to house FlexPower power modules alongside HW Pro-Watch access hardware in one compact, secure system. This unit is a 12V and 24V DC dual voltage access power system.

The C8P managed lock control module provides eight access control inputs capable of voltage or dry contact activation, and eight outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. One D8P module provides eight auxiliary class II outputs and each output is configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 170 Watts (1.41 Amps)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• 4A@12V and 4A@24V DC, 150W maximum combined output power
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 auxiliary outputs, class 2 power limited at 2.5A each
• 8 control outputs, class 2 power limited at 2.5A each
• 120 mV output voltage ripple
• System Efficiency: 88% | System BTU Rating: 66 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges up to 80Ah battery sets within UL limit
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• B100: DC input, output and Fault
• C8P: DC input, output and Fault
• D8P: DC output

Regulatory Compliance

• UL294, UL603, UL1076
• ULC S318, ULC S319, CSA C22.2 #107.1, CSA 22.2 #60950
• CE | CSFM Approved | FCC Part 15, Subpart B

Enclosure Dimensions

• Size: 36.00H x 30.00W x 4.50D in. (91.00 x 76.00 x 11.50 cm)
• Weight: 85 lbs.

Access Panel Mounting

• Pro-Watch Controllers

FPO150-B100C8PD8PE8H Specifications PDF