FPO75/150-C8D8E4S LifeSafety Power SWH 8 Door 6 Amp 12VDC 12 Amp 12VDC 8 Lock and 8 Auxiliary Distribution Outputs Access Control Power Supply in UL Listed Indoor 20" W x 24" H x 6.5" D Electrical Enclosure

SCLASS Unified Power Systems are engineered to house FlexPower power modules alongside SWH iSTAR access hardware in one compact listed enclosure. This unit is a dual voltage 12 and 24VDC, access power system. A C8 lock control module provides eight access control inputs capable of voltage or dry contact activation, and eight outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. The D8 auxilliary distribution module provide eight fused outputs rated at 3A per output and each output configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 253 Watts
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO75: 12V/6A or 24V/3A | 75 Watts
• FPO150: 12V/12A or 24V/6A | 150 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 lock outputs, fused at 3A each
• 8 auxiliary outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 99 BTU/Hr

Battery Charging

• Independent built-in 1A charger (FPO75) and 2A charger (FPO150) for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• FPO75 charges 40Ah battery sets - under UL limit
• FPO150 charges 80Ah battery sets - under UL limitt
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• C8: DC output and fault
• D8: DC outputs

Regulatory Compliance

• UL294, UL603, UL1076
• ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
• CE | FCC Part 15, Subpart B | CSFM Approved

Enclosure Dimensions

• Size: 24.00H x 20.00W x 4.50D in. (61.00 x 51.00 x 11.50 cm)

Access Mounting

• SWH Pro or ULTRA Controllers

FPO75/150-C8D8E4S Specifications PDF