FPO150/250-2D8P2M8PNL4E8H1 LifeSafety Power Honeywell 16 Door 12 Amp 12VDC 20 Amp 12VDC 16 Managed and 16 Auxiliary Class II Distribution Outputs Access Control Power Supply in UL Listed Indoor 30" W x 36" H x 6.5" D Electrical Enclosure

HCLASS Unified Power Solutions are engineered to house FlexPower power mod-ules alongside HW Pro-Watch access hardware in one compact, secure system.

This unit is a 12V and 24V DC dual voltage network managed access power system.

Dual M8 lock control modules provide sixteen access control inputs capable of volt-age or dry contact activation, and sixteen outputs programmable for failsafe / failse-cure operation at either 12 or 24 VDC and controlled by the integrated fire alarm inter-face circuit on the FPO. Dual D8P modules provide sixteen auxiliary Class II outputs and each output is configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 564 Watts
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• PS1: FPO250: 12V/20A or 24V/10A | 250 Watts
• PS2: FPO250: 12V/20A or 24V/10A | 250 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 16 managed lock control outputs fused at 3A per output
• 16 auxiliary outputs fused at 3A per output
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 218 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Charges up to 80Ah battery sets within UL limit
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

• AC input, DC1 and DC2 output
• System fault / AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• D8: DC outputs
• M8: DC input, output and fault

Regulatory Compliance

• UL294, UL603, UL1076

(LSP equipment)

• ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
• CE | CSFM Approved | FCC Part 15, Subpart B

Enclosure Dimensions

• Size: 36.00H x 30.00W x 4.50D in. (91.00 x 76.00 x 11.50 cm)
• Weight: 85 lbs.

Access Panel Mounting

• Pro-Watch Controllers