FPO75-B100C4E1V LifeSafety Power Vertx 2 Door 2 Amp 12VDC and 24VDC 4 Lock Control Access Control Power Supply in UL Listed Indoor 12" W x 14" H x 4.5" D Electrical Enclosure

VCLASS Unified Power Solutions are engineered to house FlexPower power modules alongside HID VERTX access hardware in one compact, secure solution. This unit is a 75W dual voltage 12V and 24V DC access power system.

A C4 lock control module provide four access control inputs capable of voltage or dry contact activation, and four outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 83 Watts (0.69A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO75: 12V/6A or 24V/3A | 75 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 4 lock outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

• Independent built-in 1A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• B100: DC input, output and Fault
• C4: DC input, output and Fault

Regulatory Compliance

• UL294, UL603, UL1076
• ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
• CE | CSFM Approved | FCC Part 15, Subpart B

Enclosure Dimensions

• Size: 14.00H x 12.00W x 4.50D in. (35.00 x 30.00 x 11.50 cm)

Mounting Pattern For

• V2000

FPO75-B100C4E1V Specifications PDF