The cart is empty.
Dealers. First. Always.
DWG

FPO75-B100D8PM8PNL4E4H LifeSafety Power Honeywell 4 Door 2 Amp 12VDC and 24VDC 8 Managed and 8 Auxiliary Class II Distribution Outputs Access Control Power Supply in UL Listed Indoor 20" W x 24" H x 6.5" D Electrical Enclosure

SKU: FPO75-B100D8PM8PNL4E4H
  • 120 or 230 VAC input
  • 12 and 24 VDC outputs
  • On board Fire Alarm Interface
  • Continuous and resettable DC
  • Eight auxiliary, power limited at 2.5A each
  • Four control, power limited at 2.5A each
  • Live voltage / current reporting
  • Remote battery load testing
  • Output power cycling and abnormal operation alert
  • System / AC fault reporting
  • Email and SNMP trap notification
More details...
Availability: 2 to 3 Week Lead Time
Ordering Notes: Dealers Only
MSRP Price: $1,679.00
Web Price: $1,120.00
Save to my Wish List
Product Details

HCLASS Unified Power Solutions are engineered to house FlexPower power modules alongside HW Pro-Watch access hardware in one compact, secure system. This unit is a 12V and 24V DC dual voltage access power system.

The C4P managed lock control module provides four access control inputs capable of voltage or dry contact activation, and four outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. One D8P module provides eight auxiliary class II outputs and each output is configurable for 12 or 24VDC operation.


Specifications


Input Power

  • Input 120/230 VAC 50/60 Hz | 83 Watts (0.70 Amps)
  • Overload and short circuit protection
  • Over temperature protection
  • Polarized AC power supply disconnect

Output Power

  • 2A@12V and 2A@24V DC, 75W maximum combined output power
  • Outputs: Continuous (DC1) Resettable (DC2)
  • 4 lock outputs, class II power limited at 2.5A each
  • 8 auxiliary outputs, class II power limited at 2.5A each
  • 120 mV output voltage ripple
  • System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

  • Independent built-in 1A charger for sealed lead acid or gel type batteries
  • Microprocessor dual rate charging of 12 or 24 V battery sets
  • Automatic switchover to standby battery when AC fails
  • Zero voltage drop when switched over to battery backup

Supervision

  • AC Fail (form "C" contacts)
  • System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse

Visual Indicators

  • AC input, DC1 and DC2 output
  • System fault | AC fault | Short to earth ground | Reverse battery polarity
  • Fire Alarm Input activated
  • B100: DC input, output and Fault
  • C4P: DC input, output and Fault
  • D8P: DC output

Regulatory Compliance

  • UL294, UL603, UL1076
  • ULC S318, ULC S319, CSA C22.2 #107.1, CSA 22.2 #60950
  • CE | CSFM Approved | FCC Part 15, Subpart B

Enclosure Dimensions

  • Size: 24.00H x 20.00W x 4.50D in. (61.00 x 51.00 x 11.50 cm)
  • Weight: 25 lbs.

Access Panel Mounting

  • Pro-Watch Controllers

Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In