EFLOW104NK8 Altronix 8 Channel 6Amp 12VDC/24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure

Altronix eFlow104NK8 converts a 120VAC 60Hz input into eight (8) fuse protected 12VDC or 24VDC outputs with a total of 10A max. Unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries. Dual input design allows power to be steered from two (2) factory installed independent low voltage 12 or 24VDC Altronix power supplies to eight (8) independently controlled fuse protected outputs.

Specifications

Power Supply (eFlow104NB)

Input

• Voltage - 120VAC, 60Hz, 4.5A max
• Input Fuse - 6.3A/250V

Outputs

• Voltage - 24VDC @ 10A
• Auxiliary - 1A (unswitched)
• Protection - Overvoltage protection, Filtered and regulated

Battery Backup

• Type - Sealed lead acid or gel type
• Fuse Rating - 10A @ 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• AC Input - 120VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Voltage Regulator (VR6)

Input

• Voltage - 24VDC from eFlow104NB

Output

• Voltage - 12VDC
• Current - 6A continuous
• Other - Surge suppression

Indicators (LED)

• Input - 24VDC is present
• Output - Powered

Dual Input Power Distribution Module (PDS8)

Input

• Voltage - 24VDC from eFlow104NB and 12VDC or 5VDC from VR6
• Input Fuses - 10A / 32V

Outputs

• Voltage - 12 or 24VDC individually selectable
• Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2. Individual outputs may be set to OFF position for servicing
• Output Fuses - 3A / 32VDC

Indicators (LED)

• Out1 - Out8 - Bi-colored LEDs indicate 12 or 24VDC

Agency Listings

UL

• UL294 - Access Control System Units
• UL603 - Power Supplies for Use with Burglar-Alarms Systems
• UL1481 - Power Supplies for Fire Protective Signaling Systems

cUL

• ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control
• CE - European Conformity
• All components of this kit are UL Listed sub-assemblies. Please refer to the corresponding Sub-Assembly Installation Guides for further information

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12AH/12VDC batteries
• Product Weight - 9.4 lb. (4.26 kg)
• Shipping Weight - 10.5 lb. (4.76 kg)
• Temperature Operating - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 123 BTU/Hr

EFLOW104NK8 Specifications PDF

EFLOW104NK8 Manual