MAXFIT7F16AP Altronix Access Power Controller Kit, BC750 enclosure with eFlow104NB, ACM8, PD16W

Altronix MaxFit7F16AP Access Power Controller distributes and switches power to access control systems and accessories. It converts a 120VAC, 60Hz input into sixteen (16) distributed 24VDC fuse protected outputs and sixteen (16) independently controlled 24VDC fuse protected relay outputs. Fail-Safe/Fail-Secure power outputs may be converted to dry form “C” contacts. Relays are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc.

Specifications

Power Supply (eFlow104NB)

Input

• Voltage - 120VAC, 60Hz, 4.5A max
• Input Fuse - 6.3A/250V

Outputs

• Voltage - 24VDC @ 10A
• Auxiliary - 1A (unswitched)
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery (not included)

• Type - Sealed lead acid or gel type
• Fuse Rating - 10A / 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• AC Input - 120VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Power Distribution Module (PD16W)

Input

• Voltage - 24VDC from eFlow104NB

Output

• Voltage - 24VDC
• Sixteen (16) fuse protected outputs
• 3.5A per output max
• Output Fuses - 3.5A/250V

Indicators (LED)

• Green LED - DC Output

Dual Input Access Power Controllers (Two (2) ACM8)

Input

• Voltage - 24VDC from eFlow104NB
• Main Fuse - 10A / 32V

Output

• Voltage - 24VDC
• Eight (8) independently controlled fused outputs
  • Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
  • Auxiliary power outputs (unswitched)
  • Any combination of the above
• Output Fuses - 3.5A / 32VDC

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

Physical and Environmental

• Dimensions (H x W x D) - 20.5” x 16.5” x 6.25” (520.7mm x 419.1mm x 158.8mm)
• Product / Shipping Weight (approx.) - 28.1 lb. (12.75 kg) / 34.1 lb. (15.5 kg)
• Operating Temperature - 0ºC to 50ºC (32ºF to 122ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr (approx.) - 145 BTU/Hr.

MAXFIT7F16AP Specifications PDF

MAXFIT7F16AP Manual