NSW2010-6T-POE-IN Uniview 4 PoE Ports + 2 Uplink Ports 65W Unmanaged Desktop PoE Switch

NSW2010-6T-POE-IN provides the seamless network connection. The PoE ports (Port1~4) can automatically detect and supply power with those IEEE 802.3 af/at compliant Powered Devices (PD). The electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones, etc.

It is easy to install and don’t need to configuration. With outstanding performance and quality, the 6-port 10/100Mbps desktop PoE switch is an ideal choice for expanding your home or office network.

Specifications

• Ports - 6×100Mbps network ports (RJ45), including 4 PoE ports
• Standards - IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at
• Switching capacity - 1.2Gbps
• Forwarding performance - 0.90Mpps
• Packet Buffer - 768Kbit
• MAC - 2K
• Dimensions (W×D×H) - 6.3"×3.7"×1.3" (160mm x 93mm x 32mm)
• Weight - <1.3lb (<0.6kg)
• Power supply - AC: 100-240V, 50/60Hz
• PoE - 802.3at/af
• Max. PoE Power - Max capacity: 65W, Max capacity for single port: 30W
• Switch Power - 67W
• Surge Protection - Common mode ±6KV Differential mode ±4KV
• Electrostatic standard - Common mode ±6KV Differential mode ±8KV
• Cooling Fans - 0
• Mean Time Between Failure(MTBF) - >50000 hours
• Operating temperature - 32°F-104°F (0°C-40°C)
• Operating humidity - 10%~90% (non condensing)
• Storage humidity - 5%~90% (non condensing)
• Indicator
  • PWR - Steady on: AC input is normal, Off: No AC input
  • PoE - Off: No PoE power supply, Steady on: PoE power supply is normal, Flashing: PoE power supply is abnormal
  • LINK/ACT - Off: No link, Steady: Linked at 10/100Mbps, Flashing: Transmitting data
  • Speed: - Off: Linked at 10/100Mbps, On: Linked at 1000Mbps
• Working Mode - Default(Normal mode) : All ports can communicate with each other. EXTEND(Surveillance mode): Transmission distance up to 250 meters,also downlink ports can communicate only with uplink ports.

NSW2010-6T-POE-IN Specifications PDF