NEARSCAPES4.1DSP Bogen System Residental Speaker

The NEARSCAPES 4.1 DSP system is a great way to deliver unobtrusive, super high performance sound into outdoor living spaces. This flexible “satellite/subwoofer” system including 350 Watts per channel power amp boasts high clarity at any volume, deep articulate bass, and ultra-low distortion for areas up to 3000 sq. ft. (280sq.m).

LB4TM Specifications

• Driver Complement - (1) 4” Metal Alloy Diaphragm Woofer, MLS Voice Coil Guidance, UV and Chemical Resistant Rubber Surround; (1) 1.1” Metal Alloy Diaphragm Tweeter, Ferrofluid Damping, Corrosion-Resistant Magnet Assembly
• Frequency Response - 75Hz to 19kHz, +/-3dB
• Sensitivity (1W/1m) - 86dB @16 Ohms
• Dispersion - Minimum 120 Degrees, Horizontal & Vertical
• Power Requirements - 70 Volts with selectable 32, 16, 8, 4 and 2 Watts power output; 16-Ohm bypass up to 75 Watts (Ave); 300 Watts (Peak)
• Dimensions - 5.51”W x 10.25”H x 6.3”D; 14cm W x 26cm H x 16cm D
• Product Weight (with mounting yoke and clamp) - 4.5lb. / 2.04kg
• Maximum SPL @1M (1/2 space) - 105dB
• Input Terminations - Waterproof Plug-in Connector Included (IP68 Rating)
• Environmental - Designed to Meet or Exceed Mil-Std-810 (Humidity, Salt Air, Heat, Cold, Immersion); IEC IP 56

IGS100M Specifications

• Speaker complement - Metal Alloy Diaphragm UDIO Woofer, MLS Voice Coil Guidance, UV and Chemical Resistant Rubber Surround
• Frequency Response - 38Hz to 100Hz, +/-3.0dB
• Sensitivity (1W/1m) - 91dB
• Dispersion - 360 Degrees
• Power Requirements (@16 ohms) - up to 300 Watts (Ave); 1200 Watts (Peak)
• Dimensions - 18.75” Diameter at Base x 16.25” High; 47.63cm x 41.28cm
• Product Weight - 36 lb. / 16kg
• Maximum SPL @1M (1/2 space) - 115dB
• Input Terminations - 8-Cond. Cable
• Environmental - Designed to Meet or Exceed Mil-Std-810 (Humidity, Salt Air, Heat, Cold); IEC IP56

3XL DSP Amplifier Specifications

• Dynamic Power - (6dB Crest Factor): 2 x 350W Output Circuitry: Class D
• THD @ Rated power 4 ohms (1kHz) - 0.02% (1W), 0.05% (60W), 0.08% (100W)
• S/N Ratio (20K BW) - 104dB ref. 70V, full power
• Frequency Response - 20Hz – 20kHz ,-1.5dB (1W, 4 ohm to 8 ohm load)
• Damping Factor - >120 (4 ohms/1kHz input signal)
• Power Supplies - 2 independent Switched-Mode power supplies with PFC (Power Factor Correction)
• Operating Range - 100-240 VAC (50Hz/60Hz)
• Protections - Clip, Over-Current, Over/Under Voltage, Output DC and Over-Temperature
• Analog Input - 2 x XLR electronically balanced, 2 x RCA Unbalanced
• Analog Output - 2 x Amplifier BTL, 1 x XLR electronically balanced, 1 x RCA unbalanced
• Dimensions - 20-1/2” W x 20-1/2” D x 5-1/2” H (52cm x 52cm x 14cm ) - 2RU
• Weight, Net/Shipping - 17.7 lb. (8.03 Kg) / 22.5 lb. (10 Kg)

NEARSCAPES 4.1DSP Specifications PDF