MPXHD32A000C Videotec Maximus MPX Series2 Explosion-Proof PTZ with Day/Night Camera

MAXIMUS MPX SERIES2 is an ex-proof Full-HD PTZ camera that is ideal for effective preventative video surveillance and process monitoring in the Oil & Gas, maritime or industrial sectors where fire or explosion hazards may exist due to the presence of flammable gases or vapors, flammable liquids or combustible dusts.

MAXIMUS MPX SERIES2 offers the highest level of corrosion resistance thanks to its solid AISI 316L stainless-steel construction and its microshot and electropolished surfaces. As well as this, the IP66/1P67/1P68/1P69, NEMA Type 4X and Type 6P certifications guarantee complete protection against water and dust. It can continue to operate in winds up to 210 Km/h.

Specifications

General

• AISI 316L stainless steel construction
• External surfaces micro-shot peened and electro-polished
• Dynamic positioning control system

Mechanical

• Cable inputs: 2 x 3/4" NPT
• Zero backlash
• Horizontal rotation: 360°, continuous rotation
• Vertical rotation: from -90° up to +90°
• Horizontal speed (variable): from 0.1°/s to 100°/s
• Tilt speed (variable): from 0.1° to 100°/s
• Accuracy of preset positions: 0.02°
• Integrated wiper
• Window with extra clear tempered glass: thick 12mm (0.47in)
• Unit weight: 26.5kg (58lb)

Electrical

• Supply voltage/Current consumption
230Vac -±10%, 0.5A, 50/60Hz
• 24Vac -±10%, 5A 50/60Hz
• 120Vac -±10%, 1A, 50/60Hz
• Power consumption
• 120W max

Network

• RJ45 port
• Ethernet connection: IOBASE-T/100BASE-T
• Slot SFP (SMALL FORM FACTOR PLUGGABLE)
• Ethernet connection:100BASE-FX
• Supply voltage:3.3V
• Standard: compliant MSA
• The SFP module (not supplied by VIDEOTEC) must meet the following requirements
• Laser. (lass 1, complies with EN60825-1
• Certification: UL//IEC 60950-1 or UL//IEC 62368-1

Cybersecurity

• Digitally signed firmware
• Password restricted access (HTTP digest)
• Support of various user access levels
• Control of accesses IEEE 802.1X
• HTTPS cryptography using TLS1.0, TLS1.1,TIS1.2 and TLS1.3
• Centralised certificate management
• Complies with ONVIF Security Service specifications

Video

• Communication protocol: ONVIF, Profile Q Profile S and Profile T
• Device configuration: TCP/IPv4-IPv6, UDP/IPv4-IPv6, HTTP,HTTPS, NIP, DHCP WS-DISCOVERY, DSCP, IGMP (Miultlast), SOAP, DNS
• Streaming: RTSP,RTCP, RIP/IPv4-IPv6, HTTP, Multicast
• Video compression. H.264/AVC, MJPEG,JPEG, MPEG4
• 3 independent video streams Full HD
• Image resolution: from 320x180pixel up to 1920x1080pixel in 6 steps
• Selectable frame rate from 1 to 60 images per second (fps)
• Web Server
• Directional OSD (maximum 4 settable areas)
• Motion Detection
• QoS: Differentiated DSCPs fa streaming and device management
• SNMP and NTCIP protocols

Cameras

SONY FCB.EV7520 Day/Night Full HD 30x

• Resolution: Full HD 1080p (1920x1080)
• Image Sensor: I/2.8" Exmie R CMOS sensor
• Effective Pixel: approx. 2.13 Megapaels
• Minimum Illumination
• Colour: 0.0013lx (50 IRE. High sensitivity on)
• B/W: 0.0008lx(30 IRE, High sensitivity on)
• Focal length: from 43mm (wide) up to 129mm (tele)
• Zoom: 30x (360x with digital zoom)
• Iris: from F1.6 up to F14 (Auto, Manual)
• Horizontal Viewing Angle: from 63.7° (wide end) up to 2,3°(ele end)
• Vertical Viewing Angle: from 38.5° (wide end) up to 1.3° (tele end)
• Shutter speed: from 1/1s up to 1/10000s (Auto, Manual)
• White balance: Auto, Auto Tracing, Indoor, Outdoor, Manual, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto)
• Gain: from 0dB up to 50.0dB (Auto, Manual)
• Wide Dynamic Range 120d8
• Focus System: Auto (PTZ Trigger, Full Auto), Manual
• Picture Effects: E-flip
• Noise removal (2D, 3D): OOf, On (from level 1 up to level 5)
• Exposure Control: Auto, Manual, Priority (Shutter Priority, Iris Priority, Brightness Priority)
• De-fog: Off, Low, Mid, High
• Dynamic masking of privacy zones: maximum 24 masks settable, maximum 8 simultaneously displayable
• Indoor Flicker Reduction
• Gain Limit: from 10.7 dB up to 50dB
• High sensitivity: On/Of
• Baacklight Compensation: On/Off
• Auto Slowshutter: On/Off
• Exposure compensation:Off, On (from -10.5d8 up to +10.5dB)
• Sharpness: from tool 0 up to level 15
• High Light Compensation (HLC): Off Low, Mid, High, Masking Level (Off, On, from level 1 up to level 15)
• Digital image stabilization: On/Off

I/O Interface

• Input for remote reset: 1
• Alarm inputs: 1
• Relay outputs: 1+1 (1 relay reserved for washer pump and one configurable, 1A, 30Vac/ 60Vdc max)

Environment

• For indoors and outdoors installation
• Certification temperature: from -40% (-40°F) up to +80°C (+176°F)
• Temperature test complies with NEMA-TS 2-2003 (R2008) par. 2.1.5.1, test profile fig. 2-1 (from -34°C (-29.2°F) to +74°C (165.2°F))
• De-icing function intervention (cold start): from -40°C (-40°F) up to -10°C (14°F)
• Wind resistance
• PTZ static: 230km/h (143mph) max
• PTZ operational at the maximum speed: 210km/h (130.5mph) max
• Relative humidity: from 5% up to 95%

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1
• Electromagnetic compatibility (CE): EN50130-4, EN55032 (Class A), EN61000-6-4, EN61000-3-2,EN61000-3-3
• RoHS (CE): EN50581
• Outdoor installation (CE): EN60950-22,IK60950-22
• Vibration test: EN50130-5, EN60068-2-6
• UL certification (U160950-1, CAN/CSA C22.2 No. 60950-1-07, UL62368-1, CAN/CSA C22.2 No. 62368-1-14): cULus Listed
• Electromagnetic compatibility (North America): FCC part 15 (Class A), ICES-003 (Class A)
• IP protection degree (EN/IEC60529): IP66, IP67,1P68, IP69
• Level of protection Type (UL50E): 4X, 6P
• RCM (Australian and New Zealand Regulatory Compliance Mark)

Certifications - Explosion-proof Applications

• ATEX (EN IEC 60079-0, EN 60079-1, EN 60079-31)
• IECEX( (IEC 60079-0,IEC 60079-1, IEC 60079-31)
• UL listed for USA (UL 60079-0, UL 60079-1, UL 60079-31)
• UL listed for Canada (CAN/CSA-C22.2 NO. 60079-0, CAN/CSA-C22.2 NO. 60079-1, CAN/ CSA-C22.2 NO. 60079-31)
• EAC Ex (TR CU 012/2011)
• INMETRO (ABNT NBR IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-31)
• KCs (Employment and labor department 2016-54)
• For further details on certifications and markings, consult the relevanttable

Certifications - Marine Applications

• Lloyd's Register Marine Type Approval certification (with MAXIMUS MBX communication box or with FM1010 filter)
• Test Specification Number I (ENV1, ENV2, ENV3, ENV5)
• Electromagnetic compatibility: EN60945
• Salty fog resistance: EN60068-2-52

MPXHD32A000C Specifications PDF