MVE-AH1E1-42NQ Seco-Larm 4K HDMI Extender Over Single Cat5e/6 - Up to 164ft at 4K

The ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K can be transmitted up to 197ft (60m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

Specifications

• Input video signal - 3.3V
• Input DDC signal - 5Vp-p (TTL)
• Maximum single link range - 4K@60Hz
• Deep color - 8bit
• Video formats supported - High-speed HDMI, HDCP 2.2
• Audio formats supported - LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
• Output video - 4K@60Hz
• Resolutions supported - 4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i
• Range
  • 4K@60Hz - Cat6: Up to 197' (60m); Cat5e: Up to 164' (50m)
  • 1080p - Cat6: Up to 230' (70m); Cat5e: Up to 164' (50m)
• Video amplifier bandwidth - 18Gbps
• Video input connector - HDMI Type A 19-pin female
• Video output connector - HDMI Type A 19-pin female
• Cat5e/6 wiring standard - T-568B
• IR Pass-through frequency - 30~60 kHz
• Operating voltage - 12VDC
• Power supply - 1A@12VDC (1 Adapter) (2.1mm plug)
• ESD Protection (human body model) - ±8kV (air-gap discharge), ±4kV (contact discharge)
• Current draw
  • Transmitter - 85mA@12VDC
  • Receiver - 125mA@12VDC
• Operating temperature - 32°~104° F (0°~40° C)
• Operating humidity - 20~90% RH (no condensation)
• Dimensions - 37/16"x23/8"x11/16" (88x61x17 mm)
• Weight - 5.08-oz (144g) (each)

MVE-AH1E1-42NQ Specifications PDF

MVE-AH1E1-42NQ Manual