AC1 Xantech DC Controlled AC Outlet

The AC1 is a DC voltage controlled AC outlet, capable of switching up to 15 Amperes of continuous current to a device or power strip. It is intended primarily to provide common and zone AC power management in conjunction with the CO & STATUS ports of the ZPR68 and ZPR68-10. It is usable, however, in any application where it is desired to have an AC outlet turned on and off by a DC control voltage.

Specifications

• Maximum Switching Current - 15 Amps continuous, 30 Amps peak inrush, at 120 VAC, 60 Hz
• AC Circuit Breaker - Opens if AC current exceeds 15 Amps. Push-to-Reset button
• AC Power Cord - 120 VAC 16 gauge 5 ft., 3-conductor
• Standby AC Line Current - < 2 mA (< .24 Watts)
• Control Input - Plug-in screw-type terminals for two-conductor connections. Handles wire sizes from 24 to 12 gauge
• Control Input Turn-ON Voltage Range - 5 to 30 Volts DC, @1.5 mA/V
• Control Input Turn-OFF Voltage - <2 Volts DC
• Flanges, plus supplied screws, permit easy mounting to flat surfaces
• Dimensions - 4-15/16" L x 2-1/2" W x 2-5/8" H (125mm x 64mm x 67mm)

AC1 Manual