The cart is empty.
Dealers. First. Always.
DWG

EFLOW104NKA8QM Altronix 8 Channel 6Amp 12VDC/24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure

SKU: EFLOW104NKA8QM
  • Unit provides 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power)
  • Additional aux. Class 2 power-limited output rated @ 1A
  • Short circuit and overvoltage protection
  • Supervision: AC Fail, Battery Fail and Battery Presence, Low power shutdown
  • Fire alarm disconnect
  • Bi-colored LEDs provide visual verification of voltage on each output
  • Stackable sub-assemblies save valuable space
  • Built-in charger for sealed lead acid or gel type batteries
More details...
Ordering Notes: Dealers Only
MSRP Price: $1,400.00
Web Price: $1,000.00
Save to my Wish List
Product Details

Altronix eFlow104NKA8QM converts a 120VAC 60Hz input into eight (8) fuse protected outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. eFlow104NKA8QM will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc.


Specifications


Power Supply (eFlow104NB)


Input

  • Voltage - 120VAC, 60Hz, 4.5A max
  • Input Fuse - 6.3A/250V

Outputs

  • Voltage - 24VDC @ 10A
  • Auxiliary - 1A (unswitched)
  • Protection - Overvoltage protection, Filtered and regulated

Battery Backup

  • Type - Sealed lead acid or gel type
  • Fuse Rating - 10A @ 32VDC
  • Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

  • Supervised - Latching or non-latching
  • EOL - 10K Resistor

Supervision

  • AC Failure - Form “C” contacts
  • Battery - Form “C” contacts
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

  • AC Input - 120VAC is present
  • DC Output - Powered
  • Battery - Discharged or not connected

Voltage Regulator (VR6)


Input

  • Voltage - 24VDC from eFlow104NB

Output

  • Voltage - 12VDC
  • Current - 6A continuous
  • Other - Surge suppression

Indicators (LED)

  • Input - 24VDC is present
  • Output - Powered

Network Access Power Controller (LINQ8ACM)


Input

  • Voltage - 24VDC from eFlow104NB and 12VDC or 5VDC from VR6
  • Input Fuses - 15A / 32V

Outputs

  • Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max
  • Any of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2
  • Individual outputs may be set to OFF position for servicing
  • Output Fuses - 3A / 32VDC

Programming Features


Eight (8) Programmable Outputs

  • Fail-safe, fail-secure or auxiliary outputs
  • Input controlled or manually controlled through software
  • High (over) and low (under) voltage and current monitoring by output
  • Multiple outputs may be programmed to be triggered by a single input
  • Battery back-up by output

Eight (8) Programmable Trigger Inputs

  • Normally open (NO)
  • Normally colsed (NC)
  • Open collector sink inputs
  • Wet Input (5VDC - 24VDC) with 10k resistor
  • Any combination of the above

Other Programmable Trigger Inputs

  • Monitor power supply(ies) input for voltage and currect limits (high/low)
  • Input and output current calibration
  • Programmable timer events
  • Programmable user levels
  • Enable or disable alerts by type
  • Programmable alert reporting delay

Fire Alarm Disconnect

  • Supervised - Inactive, latching or non-latching, individually selectable for any or all of the eight (8) outputs
  • EOL - 10K Resistor

LED Indicators

  • Green AC LED - Indicates AC trouble condition
  • Green BAT LED - Indicates battery trouble condition
  • Green FACP LED - Indicates FACP disconnect is triggered
  • Flashing Blue Heartbeat LED - Indicates network connection
  • Individual OUT1 - OUT8 Red LEDs - Indicate outputs are triggered
  • Out1 - Out8 - Bi-colored LEDs indicate 12 or 24VDC

Agency Listings

  • CE - European Conformity

Physical and Environmental

  • Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm). Enclosure accommodates up to two (2) 12AH/12VDC batteries
  • Product Weight - 9.4 lb. (4.26 kg)
  • Shipping Weight - 10.5 lb. (4.76 kg)
  • Operating Temperature - 0ēC to 49ēC (32ēF to 120ēF)
  • Storage Temperature - -20ēC to 70ēC (-4ēF to 158ēF)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 123 BTU/Hr

EFLOW104NKA8QM Specifications PDF

EFLOW104NKA8QM Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In