3008040 Potter WSS SignaLink Wireless Kit

The Potter SignaLink Bridge is a fully supervised wireless bridge designed to be attached to any non-explosion-proof dry contact sprinkler monitoring devices. It removes the need to hard wire sprinkler devices to each other, and operates on a 2.4 GHz frequency. Devices are able to communicate with each other up to a maximum of 800’. All enclosures are weather and UV resistant polycarbonate. There are no external antennas. The antenna is incorporated into the circuit board of each device.

Specifications

WTX-M Transmitter

• Conduit Connection - ½” NPT male
• Enclosure - UV and Impact resistant Polycarbonate
• Environmental Limitations - Indoor/Outdoor NEMA 4 / IP66 -40°F to 150°F (-40°C to 66°C)
• Max Circuit Current - 28uA
• Max Circuit Voltage - 3 VDC
• Power Requirement - Two AA size Energizer 1.5 volt Lithium Iron/Disulfide battery model L91, 3000 mAh
• Reference Level - Maximum Ambient noise level allowed: -37 dBm
• Service Use - NFPA 13, 13D, 13R and 72
• Weight - 0.5 lbs (0.23 KG)

WRX-R Receiver

• Conduit Connection - Opening for 1/2” conduit, terminals for 12-22 AWG wires
• Contact Rating - Common Alarm/Supervisory Relay: 1A at 30 VDC
• Enclosure - UV and Impact resistant Polycarbonate
• Environmental Limitations - Indoor/outdoor use with standard smoked cover. Indoor use only with optional clear cover. NEMA 4 (IP66) -40°F to 150°F (-40°C to 66°C)
• Power Requirement - 24VDC at 55mA Normal, 75mA in Alarm
• Reference Level - Maximum Ambient noise level allowed: -37dBm
• Service Use - NFPA 13, 13D, 13R, 72
• Weight - 0.75lbs (0.34KG)

3008040 Specifications PDF