Categories > Browse by Brand > Altronix > Altronix Power Supply/Chargers w/ Controller > Altronix Access Power Controllers - PTC

AL1012ACMCB220 Altronix 8 Channel 10Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure - Gray

SKU: AL1012ACMCB220

Eight (8) independently controlled Fail-Safe and/or Fail-Secure power outputs
Eight (8) auxiliary power outputs (unswitched)
Output PTCs are rated @ 2.5A
Filtered and electronically regulated outputs
Supervision
- AC Fail
- Battery Fail and Battery Presence
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
Alarm output relay indicates that FACP input is triggered
Fire Alarm disconnect input options
- a) Normally open (NO) or normally closed (NC) dry contact input
- b) Polarity reversal input from FACP signaling circuit

More details...

Ordering Notes: Dealers Only

MSRP Price: $626.00

Web Price: $447.00

Product Details

Altronix ACMCB220 series distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Specifications

Input

Voltage - 220VAC (working range 198VAC - 256VAC), 50/60Hz
Fusing - Varies, see Reference Chart

Output

Voltage - 12VDC
Current - Varies, depending on the model
Protection - PTC 2.5A
Auxiliary - 3.5A (unswitched)
Other - Overvoltage protection, Filtered and regulated outputs

Back-up Battery

Capacity - 12AH / 12VDC
Type - Sealed lead acid or gel type
Fuse Rating - 15A @ 32VDC
Failover - Upon AC loss, instantaneous
Fire Alarm Disconnect - Latching or non-latching, individually selectable for any or all of the eight (8) outputs

Supervision