AL1024ULXPD4R Altronix 4 Channel 10Amp 24VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure - Red

Altronix AL1024ULX series are power supply/chargers that convert a 115VAC, 60Hz input into a single fused, four (4), eight (8) or sixteen (16) fuse or PTC protected outputs. Outputs are 24VDC with a total of 10A max.

Specifications

Input

• Voltage - 115VAC, 60Hz, 4.2A max
• Fusing - 5A / 250V

Outputs

• Voltage - 24VDC
• Current - 10A @ 24VDC continuous max
• Protection - Fused 3.5A/ PTC 2.5A
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery

• Capacity - 12AH / 12VDC
• Type - Sealed lead acid or gel type
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Agency Listings

All Models

UL

• UL294 - Access Control System Units
• UL1481 - Power Supplies for Fire Protective Signaling Systems

cUL

• CSA C22.2 No.205 - Signal Equipment

AL1024ULX only

• CSFM - California State Fire Marshall Approved
• MEA - NYC Department of Buildings Approved
• FM - Factory Mutual Approved

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
• Product Weight - 9.4 lbs. (4.6 kg)
• Shipping Weight - 11.7 lbs. (5.3 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 123 BTU/Hr

AL1024ULXPD4R Specifications PDF

AL1024ULXPD4R Manual