AL300ULPD4CBR Altronix 4 Channel 2.5Amp 24VDC or 2.5Amp 12VDC Power Supply in UL Listed NEMA 1 Indoor 13” W x 13.5” H x 3.25” D Steel Electrical Enclosure - Red

Altronix AL300ULX series power supply/chargers convert a 115VAC, 60Hz input into a single fused, four (4), eight (8) or sixteen (16) fuse or PTC protected outputs. Outputs are selectable for 12VDC or 24VDC with a total of 2.5A max.

Specifications

Input

• Voltage - 115VAC, 60Hz, 3.5A max
• Fusing - 5A / 250V

Outputs

• Voltage - 12VDC or 24VDC selectable
• Current - 2.5A power-limited continuous max
• Protection - Fused 3.5A / PTC 2.5A
• Other - Overvoltage protection Filtered and regulated. PTC protected outputs are auto-resettable

Back-up Battery (not included)

• Capacity - 7AH / 12VDC
• Type - Sealed lead acid or gel type
• Charging current - 0.7A
• Fuse Rating - 15A @ 32VDC
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Agency Listings

All Models

UL

• UL294 - Access Control System Units
• UL603 - Power Supplies for Use with Burglar-Alarms Systems
• UL 1069 - UL Listed Hospital Signaling and Nurse Call Equipment
• UL1481 - Power Supplies for Fire Protective Signaling Systems

cUL

• CSA C22.2 No.205 - Signal Equipment
• CSA Standard C603-M1988 - Burglar Alarm System

AL300ULX, AL300ULXX and AL300ULXJ only

• CSFM - California State Fire Marshall Approved

Physical and Environmental

• Dimensions (H x W x D) - 13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
• Product Weight - 6.8 lbs. (3.1 kg)
• Shipping Weight - 8.6 lbs (3.9 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 15 or 31 BTU/Hr

AL300ULPD4CBR Specifications PDF

AL300ULPD4CBR Manual