AL400ULMX Altronix 5 Channel 3Amp 24VDC or 4Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure

Altronix M series access control power supply/chargers are specifically designed for use with access control systems and accessories. These units convert a 115VAC, 60Hz input into five (5) individually protected 12VDC or 24VDC outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open [NO] or normally closed [NC] supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.

Specifications

Input

• Voltage - 115VAC 60Hz
• Fusing - Varies, see Reference Chart

Output

• Voltage - 12VDC or 24VDC, see Reference Chart
• Current - Varies, see Reference Chart
• Protection - PTC 2.5A
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery (not included)

• Capacity - 12AH / 12VDC
• Type - Sealed lead acid or gel type
• Fuse Rating - 15A @ 32VDC. AL600ULM(X) does not have a battery fuse
• Failover - Upon AC loss, instantaneous

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts

Indicators (LED)

• Input - 115VAC is present
• DC Output - Powered
• Battery - Discharged or not connected
• Power and Input - Individual LEDs indicate outputs are. triggered (relays energized)

Agency Listings

All Models

• UL - UL294: Access Control System Units
• cUL - CSA C22.2 No.205: Signal Equipment
• UL1481 - Fire Protective Signaling Systems
• CSFM - California State Fire Marshall Approved

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
• Product Weight - 9.4 lbs. (4.26 kg)
• Shipping Weight - 10.4 lbs. (4.72 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 12VDC: 25 BTU/Hr, 24VDC: 37 BTU/Hr.

AL400ULMX Specifications PDF

AL400ULMX Manual