Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

AL600ULMX Altronix 5 Channel 6Amp 24VDC or 6Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure

SKU: AL600ULMX
  • Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP)
  • Five (5) individual power-limited Class 2 outputs (auto-resettable)
  • Filtered and electronically regulated outputs
  • Thermal and short circuit protection with auto reset
  • Overload protection
  • Output relay energizes when unit is triggered (form “C” contact rated 1A @ 28VDC)
  • Supervision: AC Fail, Battery Fail and Battery Presence
  • Built-in charger for sealed lead acid or gel type batteries
More details...
Ordering Notes: Dealers Only
MSRP Price: $486.00
Online Price: $347.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



AL600ULMX Altronix 5 Channel 6Amp 24VDC or 6Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure
AL600ULMX Altronix 5 Channel 6Amp 24VDC or 6Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 12” W x 15.5” H x 4.5” D Steel Electrical Enclosure
Previous Item   Next Item
 
Product Details

Altronix M series access control power supply/chargers are specifically designed for use with access control systems and accessories. These units convert a 115VAC, 60Hz input into five (5) individually protected 12VDC or 24VDC outputs (see specifications). Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open [NO] or normally closed [NC] supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay enables HVAC Shutdown, Elevator Recall or may be used to trigger auxiliary devices.


Specifications


Input

  • Voltage - 115VAC 60Hz
  • Fusing - Varies, see Reference Chart

Output

  • Voltage - 12VDC or 24VDC, see Reference Chart
  • Current - Varies, see Reference Chart
  • Protection - PTC 2.5A
  • Other - Overvoltage protection, Filtered and regulated

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC
  • Type - Sealed lead acid or gel type
  • Fuse Rating - 15A @ 32VDC. AL600ULM(X) does not have a battery fuse
  • Failover - Upon AC loss, instantaneous

Supervision

  • AC Failure - Form “C” contacts
  • Battery - Form “C” contacts

Indicators (LED)

  • Input - 115VAC is present
  • DC Output - Powered
  • Battery - Discharged or not connected
  • Power and Input - Individual LEDs indicate outputs are. triggered (relays energized)

Agency Listings


All Models

  • UL - UL294: Access Control System Units
  • cUL - CSA C22.2 No.205: Signal Equipment
  • UL1481 - Fire Protective Signaling Systems
  • CSFM - California State Fire Marshall Approved

Physical and Environmental

  • Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
  • Product Weight - 9.7 lbs. (4.4 kg)
  • Shipping Weight - 11.2 lbs. (5.1 kg)
  • Operating Temperature - 0ēC to 49ēC (32ēF to 120ēF)
  • Storage Temperature - -20ēC to 70ēC (-4ēF to 158ēF)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 12VDC: 37 BTU/Hr, 24VDC: 74 BTU/Hr.

AL600ULMX Specifications PDF

AL600ULMX Manual


Product Reviews

Write your own review

 

Rate this product: