The cart is empty.
Dealers. First. Always.
DWG

EFLOW102NA8DJP Altronix 8 Channel 10Amp 12VDC Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure

SKU: EFLOW102NA8DJP
  • Available with 1, 8 or 16 outputs
  • Fused outputs or PTC protected Class 2 power-limited outputs
  • Additional aux. Class 2 power-limited output rated @ 1A
  • Overvoltage protection
  • Fire alarm disconnect
  • Supervision
    • AC Fail
    • Battery Fail and Battery Presence
    • Low power shutdown
    Built-in charger for sealed lead acid or gel type batteries
  • Instantaneous transfer to stand-by batteries
More details...
Ordering Notes: Dealers Only
MSRP Price: $666.00
Online Price: $476.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

Altronix eFlow102N series power supply/chargers convert a 120VAC, 60Hz input into a single, eight (8), or sixteen (16) fused outputs or PTC protected Class 2 power-limited 12VDC outputs with a total of 10A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.


Specifications


Input

  • Voltage - 120VAC, 60Hz, 3.5A max
  • Fusing - 5A / 250V

Outputs

  • Voltage - 12VDC
  • Current - 10A continuous max
  • Protection - Fused 2.5A/ PTC 2A
  • Auxiliary - Class 2 power-limited @ 1A (unswitched)
  • Other - Overvoltage protection, Filtered and regulated

Back-up Battery

  • Capacity - 7AH / 12VDC (1 within enclosure), 12AH / 12VDC (requires larger “X” enclosure), 40AH, 65AH (requires separate enclosure)
  • Type - Sealed lead acid or gel type
  • Fuse Rating - 15A / 32VDC
  • Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

  • Supervised - Latching or non-latching
  • EOL - 10K Resistor

Supervision

  • AC Failure - Form “C” contacts
  • Battery - Form “C” contacts
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

  • Input - 120VAC is present
  • DC Output - Powered

Agency Listings


UL

  • UL294 - Access Control System Units
  • UL603 - Power Supplies for Use with Burglar-Alarms Systems
  • UL1481 - Power Supplies for Fire Protective Signaling Systems

cUL

  • ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control
  • CSFM - California State Fire Marshall Approved
  • CE - European Conformity

Physical and Environmental

  • Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
  • Product Weight - 8.4 lbs. (3.81 kg)
  • Shipping Weight - 9.5 lbs. (4.31 kg)
  • Operating Temperature - 0ēC to 49ēC (32ēF to 120ēF)
  • Storage Temperature - -20ēC to 70ēC (-4ēF to 158ēF)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 61 BTU/Hr

ACM8CB Specifications


Input

  • Voltage - 12 to 24 VAC or VDC operation (setting not required), 0.6A @ 12V, 0.3A @ 24V current consumption with all relays energized. Main fuse is rated at 10A
  • Trigger Inputs - Eight (8) Access Control System trigger inputs
    • a) Eight (8) normally open (NO) inputs
    • b) Eight (8) open collector sink inputs
    • c) Any combination of the above
  • Input Options
    • a) One (1) common power input (board and lock power)
    • b) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power)

Outputs

  • Eight (8) independently controlled Class 2 Rated PTC protected power-limited auto-resettable 2.5A outputs
  • a) Eight (8) Fail-Safe and/or Fail-Secure power outputs Eight (8) auxiliary power outputs (unswitched)

Output ratings

  • Output PTCs are rated 2.5A each
  • Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total

Indicators (LED)

  • Red LEDs - Outputs are triggered (relays energized)
  • Green LED - FACP disconnect is triggered

Agency Listings

  • UL - UL294 : Access Control System Units
  • cUL - CSA Standard C22.2 : General Signaling Equipment No.205-M1983

Physical and Environmental

  • Dimensions (H x W x D) - 8” x 4” x 0.75” (203.2mm x 114.3mm x 19.1mm)
  • Product Weight - 0.65 lbs. (0.29 kg)
  • Shipping Weight - 0.85 lbs. (0.39 kg)
  • Operating Temperature - 0ēC to 49ēC (32ēF to 120ēF)
  • Storage Temperature - -20ēC to 70ēC (-4ēF to 158ēF)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 4 BTU/Hr

EFLOW102NX Specifications PDF

EFLOW102NX Manual

ACM8CB Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In