EFLOW6NA8QMR Altronix 8 Channel 6Amp 24VDC or 6Amp 12VDC Power Supply in UL Listed NEMA 1 Indoor 12.25” W x 15.5” H x 4.5” D Steel Electrical Enclosure

Altronix eFlow6N series power supply/chargers convert a 120VAC 60Hz input into a single, eight (8) or sixteen (16) fused outputs or PTC protected Class 2 power-limited outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 6A max. supply current. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Specifications

Input

• Voltage - 120VAC, 60Hz, 3.5A max
• Fuse Rating - 5A / 250V

Outputs

• Voltage - 12VDC or 24VDC selectable
• Current - 6A continuous max
• Protection - Fused 2.5A / PTC 2A
• Auxiliary - Class 2 power-limited @ 1A (unswitched)
• Other - Overvoltage protection, Filtered and regulated

Back-up Battery

• Capacity - 7AH / 12VDC (2 within enclosure), 12AH / 12VDC (requires larger “X” enclosure), 40AH, 65AH (requires separate enclosure)
• Type - Sealed lead acid or gel type
• Fuse Rating - 10A @ 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• Input - 120VAC is present
• DC Output - Powered

Agency Listings

UL

• UL294 - Access Control System Units
• UL603 - Power Supplies for Use with Burglar-Alarms Systems
• UL1481 - Power Supplies for Fire Protective Signaling Systems

cUL

• ULC-S318-96 - Power Supplies for Burglar Alarm Systems. Also suitable for Access Control
• CSFM - California State Fire Marshall Approved
• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
• Product Weight - 8.55 lbs. (3.88 kg)
• Shipping Weight - 9.65 lbs (4.38) kg
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• BTU/Hr. (approx.) - 12VDC : 37 BTU/Hr, 24VDC: 74 BTU/Hr

LINQ8ACM Specifications

• Input - Two (2) Independent Low Voltage Inputs

Input Voltage Options

Single Input

• Input1 - 12 or 24 VDC from eFlow series power supply

Dual Input Option 1

• Input 1 - 12 or 24 VDC from eFlow series power supply
• Input 2 - a) 12 or 24 VDC from eFlow series power supply, b) 5 or 12 VDC from VR6 voltage regulator

Dual Input Option 2

• 12 and 24 VDC from Tango1B PoE Driven Power Supply

Voltage Range

• LINQ8ACM - 5VDC to 24VDC, up to 10A each or 20A total input
• Current Consumption - 0.6A @ 12V, 0.3A @ 24V with all relays energized
• Main Fuse Rating - 15/32A

Outputs

• LINQ8ACM - Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max
• Do not exceed the individual power supply ratings
• Any of the eight (8) fuse/PTC protected power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Output Ratings

• LINQ8ACM - Fuses are rated 3A/32V each
• Total output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input

Programming Features

Eight (8) Programmable Outputs

• Fail-safe, fail-secure or auxiliary outputs
• Input controlled or manually controlled through software
• High (over) and low (under) voltage and current monitoring by output
• Multiple outputs may be programmed to be triggered by a single input
• Battery back-up by output

Programming Features (cont’d)

• Eight (8) Programmable Trigger Inputs
  • Normally open (NO)
  • Normally colsed (NC)
  • Open collector sink inputs
  • Wet Input (5VDC - 24VDC) with 10k resistor
  • Any combination of the above
• Other Programmable Trigger Inputs
  • Monitor power supply(ies) input for voltage and currect limits (high/low)
  • Input and output current calibration
  • Programmable timer events
  • Programmable user levels
  • Enable or disable alerts by type
  • Programmable alert reporting delay

Fire Alarm Disconnect

• Supervised - Inactive, latching or non-latching, individually selectable for any or all of the eight (8) outputs
• EOL - 10K Resistor

LED Indicators

• Green AC LED - indicates AC trouble condition
• Green BAT LED - indicates battery trouble condition
• Green FACP LED - indicates FACP disconnect is triggered
• Flashing Blue Heartbeat LED - indicates network connection
• Individual OUT1 - OUT8 Red LEDs - indicate outputs are triggered
• Individual Voltage LEDs - indicate 12VDC (Green) or 24VDC (Red)

Agency Listings

• UL - UL 294 7th Edition: Access Control System Units

Physical and Environmental

• Dimensions (W x L x H) - 8” x 4.5” x 1.25” (203.2mm x 114.3mm x 31.8mm)
• Product Weight - 0.7 lb. (0.32 kg)
• Shipping Weight - 0.95 lb. (0.43 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 93% +/-5%
• BTU/Hr. (approx.) - 4 BTU/Hr, Mounting hardware included

EFLOW6NX Specifications PDF

LINQ8ACM Specifications PDF