Dealers. First. Always.       |      The professional integrators favorite security distributor for over 20 years and counting.
DWG



Popular Everyday Products

MAXIMAL11FDV Altronix 16 Channel 3.5Amp 24VDC or 3.5Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 19” W x 26” H x 6.25” D Steel Electrical Enclosure

SKU: MAXIMAL11FDV
  • Sixteen (16) independently controlled Fail-Safe and/or Fail-Secure power outputs
  • Sixteen (16) auxiliary power outputs (unswitched)
  • Output PTCs are rated @ 2.5A
  • Filtered and electronically regulated outputs
  • Supervision: AC Fail, Battery Fail and Battery Presence, Low power shutdown
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs
  • Alarm output relay indicates that FACP input is triggered
  • Fire Alarm disconnect input options
    • a) Normally open (NO) or normally closed (NC) dry contact input
    • b) Polarity reversal input from FACP signaling circuit
More details...
Ordering Notes: Dealers Only
MSRP Price: $1,484.00
Online Price: $1,060.00


DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



MAXIMAL11FDV Altronix 16 Channel 3.5Amp 24VDC or 3.5Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 19” W x 26” H x 6.25” D Steel Electrical Enclosure
MAXIMAL11FDV Altronix 16 Channel 3.5Amp 24VDC or 3.5Amp 12VDC Access Control Power Supply in UL Listed NEMA 1 Indoor 19” W x 26” H x 6.25” D Steel Electrical Enclosure
Previous Item   Next Item
 
Product Details

MaximalFDV Access Power/Controllers distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into sixteen (16) independently controlled 12VDC or 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc.


Specifications


Input

  • Voltage - 220VAC (working range 198VAC - 256VAC), 50/60Hz
  • Fusing - Varies, See Reference Chart

Output

  • Voltage - 12VDC or 24VDC, see Reference Chart
  • Current - Varies, see Reference Chart
  • Protection - PTC 2.5A
  • Auxiliary - 3.5A (unswitched)
  • Other - Overvoltage protection. Filtered and regulated outputs

Back-up Battery (not included)

  • Capacity - 12AH / 12VDC (up to 4 within enclosure), 40 AH / 65 AH (requires separate enclosure)
  • Type - Sealed lead acid or gel type
  • Fuse Rating - Varies, see Reference Chart
  • Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

  • Supervised - Latching or non-latching, individually selectable for any or all of the sixteen (16) outputs
  • EOL - 10K Resistor

Supervision

  • AC Failure - Form “C” contacts
  • Battery - Form “C” contacts
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

  • Input - 220VAC is present
  • DC Output - Powered
  • Relays - Individual LEDs indicate outputs are triggered (relays energized)
  • FACP - Indicates FACP disconnect is triggered

Agency Listings

  • CE - European Conformity

Physical and Environmental

  • Dimensions (H x W x D) - 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm)
  • Product Weight - 43 lbs. (19.5 kg)
  • Shipping Weight - 47 lbs. (21.32 kg)
  • Operating Temperature - 0บC to 49บC (32บF to 120บF)
  • Storage Temperature - -20บC to 70บC (-4บF to 158บF)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr. (approx.) - 12VDC: 41 BTU/Hr, 24VDC: 88 BTU/Hr, 12VDC and 24VDC: 65 BTU/Hr

MAXIMAL11FDV Specifications PDF

MAXIMAL11FDV Manual


Product Reviews

Write your own review

 

Rate this product: