The cart is empty.
Dealers. First. Always.
DWG

MAXIMAL33FDJP Altronix 8 Channel 6Amp 24VDC or 6Amp 12VDC Power Supply in UL Listed NEMA 1 Indoor 19” W x 26” H x 6.25” D Steel Electrical Enclosure

SKU: MAXIMAL33FDJP
  • Altronix eFlow6NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 12VDC or 24VDC output
  • It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries
More details...
Ordering Notes: Dealers Only
MSRP Price: $1,480.00
Web Price: $1,057.00
Save to my Wish List
Product Details

EFLOW6NB Specifications


Input

  • Voltage - 120VAC, 60Hz, 3.5A max
  • Fuse Rating - 5A / 250V

Outputs

  • Voltage - 12VDC or 24VDC selectable
  • Current - 6A continuous max.
  • Auxiliary - Power-limited @ 1A (unswitched).
  • Other- Overvoltage protection. Filtered and regulated.

Back-up Battery (not included)

  • Type - Sealed lead acid or gel type.
  • Fuse Rating - 10A @ 32VDC.
  • Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

  • Supervised - Latching or non-latching.
  • EOL - 10K Resistor.

Supervision

  • AC Failure - Form "C" contacts.
  • Battery - Form “C" contacts.
  • Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.

Indicators (LED)

  • Input - 120VAC is present.
  • DC Output - Powered.

Agency Listings

  • UL - Access Control - UL294, Burglar Alarm - UL603, Fire Alarm - UL1481
  • cUL - Burglar Alarm - ULC-S318-96, Access Control - ULC-S319-05, Signal Equipment - CSA C22.2 No.205

Physical and Environmental

  • Dimensions (H x W x D) - 7.5” x 4.6” x 1.75” (190.5 mm x 116.8 mm x 44.5 mm).
  • Product Weight - 0.8 lbs. (0.36 kg).
  • Shipping Weight - 0.95 lbs. (0.43kg).
  • Operating Temperature - 0°C to 49°C (32°F to 120°F).
  • Storage Temperature - -20°C to 70°C (-4°F to 158°F).
  • Relative Humidity - 85% +/-5%
  • BTU/Hr (approx.) 12VDC - 37, 24VDC - 74

ACM8CB Specifications


Input

  • Voltage
    • 12 to 24 VAC or VDC operation (setting not required), 0.6A @ 12V, 0.3A @ 24V current consumption with all relays energized
    • Main fuse is rated at 10A
  • Trigger Inputs - Eight (8) Access Control System trigger inputs:
    • Eight (8) normally open (NO) inputs
    • Eight (8) open collector sink inputs
    • Any combination of the above
  • Input Options
    • One (1) common power input (board and lock power)
    • Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power)

Outputs

  • Eight (8) independently controlled Class 2 Rated
  • PTC protected power-limited auto-resettable 2.5A outputs:
    • Eight (8) Fail-Safe and/or Fail-Secure power outputs
  • Eight (8) auxiliary power outputs (unswitched)
  • Output ratings - Output PTCs are rated 2.5A each
  • Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total

Indicators (LED)

  • Red LEDs - Outputs are triggered (relays energized)
  • Green LED - FACP disconnect is triggered

Agency Listings

  • UL
    • UL294 - Access Control System Units
  • cUL
    • CSA Standard C22.2 No.205-M1983 - General Signaling Equipment

Physical and Environmental

  • Dimensions (L x W x H) - 8" x 4" x 0.75" (203.2mm x 114.3mm x 19.1mm)
  • Product Weight - 0.65 lbs. (0.29 kg)
  • Shipping Weight - 0.85 lbs. (0.39 kg)
  • Temperature
    • Operating - 0°C to 49°C (32°F to 120°F)
    • Storage - -20°C to 70° C (-4°F to 158°F)
  • Relative Humidity - 85% +/-5%
  • BTU/Hr (approx.) - 4 BTU/Hr

EFLOW6NB Specifications PDF

EFLOW6NB Installation Manual

ACM8CB Specifications PDF

ACM8CB Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In