MAXIMAL33FV161 Altronix 8 Channel 6Amp 24VDC or 6Amp 12VDC Power Supply in UL Listed NEMA 1 Indoor 19” W x 26” H x 6.25” D Steel Electrical Enclosure

EFLOW6NBV Specifications

Input

• Voltage - 220VAC, 50/60Hz, 2.1A max
• Fuse Rating - 5A / 250V

Outputs

• Voltage - 12VDC or 24VDC selectable
• Current - 6A continuous max
• Auxiliary - 1A (unswitched)
• Other - Overvoltage protection. Filtered and regulated.

Back-up Battery (not included)

• Type - Sealed lead acid or gel type
• Fuse Rating - 10A @ 32VDC
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form "C" contacts
• Battery - Form “C" contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators (LED)

• Input - 120VAC is present
• DC Output - Powered

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 7.5” x 4.6” x 1.75” (190.5 mm x 116.8 mm x 44.5 mm)
• Product Weight - 0.8 lbs. (0.36 kg)
• Shipping Weight - 0.95 lbs. (0.43kg)
• Operating Temperature - 0°C to 49°C (32°F to 120°F)
• Storage Temperature - -20°C to 70°C (-4°F to 158°F)
• Relative Humidity - 85% +/-5%
• BTU/Hr (approx.) - 12VDC - 12VDC: 37 BTU/Hr, 24VDC: 74 BTU/Hr

ACM8 Specifications

Input

• Voltage
  • 12 to 24 VAC or VDC operation (setting not required), 0.6A @ 12V, 0.3A @ 24V current consumption with all relays energized
  • Main fuse is rated at 10A
• Trigger Inputs - Eight (8) Access Control System trigger inputs:
  • Eight (8) normally open (NO) inputs
  • Eight (8) open collector sink inputs
  • Any combination of the above
• Input Options
  • One (1) common power input (board and lock power)
  • Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power)

Outputs

• Eight (8) independently controlled 2.5A outputs:
• Eight (8) Fail-Safe and/or Fail-Secure power outputs
• Eight (8) dry form “C" 5A rated relay outputs
• Any combination of the above
• Eight (8) auxiliary power outputs (unswitched)
• Output ratings - Output fuses are rated 3.5A each
• Note - Total output current is determined by the power supply, not to exceed a maximum of 10A total

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

Agency Listings

• UL
  • Access Control - UL294
• cUL
  • General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983

Physical and Environmental

• Enclosure Dimensions (H x W x D) - 8" x 4" x 0.75" (203.2mm x 114.3mm x 19.1mm)
• Product Weight - 0.65 lbs. (0.29 kg)
• Shipping Weight - 0.85 lbs. (0.39 kg)
• Temperature
  • Operating - 0°C to 49°C (32°F to 120°F)
  • Storage - -20°C to 70° C (-4°F to 158°F)
• Relative Humidity - 85% +/-5%
• BTU/Hr (approx.) - 4 BTU/Hr

PD16W Specifications

Input

• Voltage Range - 12VDC or 24VDC, up to 10A or 24VAC or 28VAC, up to 12A.

Outputs

• Sixteen (16) fuse protected outputs.
• 2.5A per output max.
• Total output current should not exceed max current rating of power supply employed.
• Fuses are rated @ 3.5A/250V.

Indicators (LED)

• DC Output - Power LED.

Agency Listings

• UL - UL294 Access Control, UL603 Burglar Alarm, UL1481 Fire Alarm
• cUL - General Signaling Equipment Evaluated to CSA Standard C22.2 No.205-M1983, Power Supplies for Burglar Alarm Systems ULC-5318-96.

Physical and Environmental

• Dimensions (H x W x D) - 6" x 5.875" x 0.95" (152.4mm x 149.2mm x 24.1mm).
• Product Weight - 0.4 lbs. (0.18 kg).
• Shipping Weight - 0.5 lbs. (0.23 kg).
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF).
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF).
• Relative Humidity - 85% +/-5%.

EFLOW6NBV Specifications PDF

ACM8 Specification PDF

ACM8 Installation Manual

PD16W Specifications PDF

PD16W Installation Manual