NETWAY8V Altronix Midspan Injector 8 Port 10/100 PoE/PoE+ 150W 220VAC

Altronix NetWay8V Midspan injector provides power and passes data for PoE and PoE+ compliant cameras/edge devices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT (PoE) or NetWayXTX (PoE+) repeater module can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

Specifications

Input

• 220VAC 50/60Hz, 1.8A

Power

• Unit provides PoE / PoE+
• 30W full power per port
• Total power: 150W

Ethernet

• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT5e or better structured cable
• Distance: up to 100m
• Speed: 10/100 BaseT, half/full duplex, auto negotiation

Indicators (LED)

• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100 Base-T/active
• Green LED - Port status

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (W x L x H) - 1U rack mount chassis for use in standard EIA 19” rack. 1.625” x 19.125” x 8.5” (41.275mm x 486mm x 216mm)
• Product Weight - 8.1 lbs. (3.66 kg)
• Shipping Weight - 9.4 lbs. (4.26 kg)
• Operating Temperature - -20ºC to 40ºC (-4ºF to 104ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/-5%
• Operating Altitude - -304.8 to 3,048m (-1,000 to 10,000 ft.)
• BTU/Hr. (approx.) - 24VDC: 77 BTU/Hr

NETWAY8V Specifications PDF

NETWAY8V Manual