2600T-LS GRI Normally Closed for a Closed Loop Circuit 12VDC Low Sensitivity

The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.

Power Requirements

• Operating Voltage - 12 Volts DC
• Operating Current - 12 mA

Wire Contacts

• Red Wire - +12 Volts DC
• Black Wire - Ground
• Green Wire - Relay Contact
• White Wire - Relay Contact

Contact Characteristics

• Contact Resistance - 100 mΩ
• Switching Voltage - 30VDC Max
• Switching Current - 500 mA Max
• Power - 250mW Max

2600T-LS Specifications PDF